Magnadyne M3500DVD Disc Warnings, Handling, Disc Cleaning, Preparing New Discs with Rough Spots

Disc Warnings

Handling:

•Dirt, dust, scratches and warping disc will cause non-operation.

•Do not place stickers on disc or scratch disc.

•Do not place discs in the following places: Direct sunlight, dirty, dusty or damp areas, near car heaters, car seats or dashboard.

Disc Cleaning:

Use a dry, soft cloth to wipe the disc’s surface. If the disc is very dirty, use a soft cloth slightly moistened with isopropyl (rubbing) alcohol. Never use solvents such as benzine, thinner or conventional record cleaners as they may mar the surface of the disc.

Note: A disc may become somewhat scratched (although not enough to make it unusable) depending on handling and conditions in the usage environment.

Preparing New Discs with Rough Spots:

A new disc may have rough edges on its inside and outside edges. If a disc with rough edges is used, the proper setting will not be performed and the player will not play the disc. Therefore, remove the rough edges in advance by using a ball point pen or pencil as shown. To do this, press the side of the pen or pencil against the inside and outside edges of the disc.

Label side up

Do not touch the underside of the disc

Do not bend

Wipe the disc from the center toward the outside edge

Rough spots on

outside edge Rough spots on inside edge

Ball point pen or pencil

18