Magnadyne M3500DVD Reset Function, Additional Features, Button Press Beep Confirmation

Reset Function

Press the OPEN button on the front panel to fold

down the panel, and you will see the RESET but-

ton on the base of the unit.

When the below situation occurs, you can press

the RESET button to solve the problem:

•Initial installation of the unit when all wiring is completed.

•Some of the buttons do not work.

•Error symbol on the display.

Should any of these conditions occur, simply press and release the restart button using the tip of a ball point pen. This will restart the radio’s microprocessor. After pressing the restart but- ton, you should recheck to see if the radio func- tions normally.

Additional Features

Button Press Beep Confirmation:

If you want the M3500DVD to beep everytime a button is pressed follow the instructions below:

1.Press the VOL knob until “BEEP OFF” appears in the display.

2.Rotate the VOL knob until “BEEP ON” appears in the display.

3.After waiting a few seconds the unit will exit programming.

Area Radio Frequency Adjustment:

Note: If operating the unit in the USA do not change the area.

To Change the Area:

1.Press the VOL knob until “USA” appears in the display.

2.Rotate the VOL knob until “OCEAN” appears in the display.

3.After waiting a few seconds the unit will exit programming.

EQ	MODE
	AMS
MUTE
SEL	BAND				AM/FM Multi-Media Receiver
		RPT	A-B	RDM	INT	10-	10+
	VOL
		1	2	3	4	5	6

EQ	MODE
	AMS
MUTE
SEL	BAND				AM/FM Multi-Media Receiver
		RPT	A-B	RDM	INT	10-	10+
	VOL
		1	2	3	4	5	6

16