Radio Operation
Select a Band
In Tuner Mode, press the “BAND” button (13) to select the desired band in the following order: F1, F2, F3 and AM. Each band can store up to six pre- set stations.
Tuning
Automatic Search Tuning: Press the “TRACK DOWN” or “TRACK UP” (16) button to move to the next or previous station automatically.
Manual Tuning: Press and hold the “TACK DOWN” or “TRACK UP” button (16) for more than 4 seconds then release, MANUAL will appear in the display area. Then press and release the “TRACK DOWN” OR “TRACK UP” button (16) until desired frequency is selected. The unit will default back to AUTO tuning mode after 5 sec- onds of no button activity.
Automatic Memory Store: Selects six strong sta- tions and stores them in the current band. Select a band (if needed). Press and hold the button “AMS” button (5) for more than three seconds. The new stations replace stations already stored in that band.
Preset Scan: Scan stations stored in the current band. Select a band (if needed). Press the AMS button (5) momentarily. The radio pauses for five seconds at each preset station. When desired station is reached, press the AMS button again to stop scanning.
Preset Stations
Six numbered preset buttons store and recall sta- tions for each band.
1 | 2 | 3 | 4 | 5 | 6 |
|
| INTRO | REPEAT | SHUFFLE | CD- | CD | + |
Select a band (if needed). Select a station by pressing the “TRACK DOWN” or “TRACK UP”
(16)button. Press and hold any of the preset but- tons for three seconds to memorize the station. The preset number will appear in the display.
Recall a Station
Select a band (if needed). Press one of the six preset buttons to select a stored station.
Mono/Stereo
Changes FM radio reception from Mono (MONO will be displayed) to Stereo (STEREO will be dis- played).
Sound Controls
Audio Control Knob
By pressing the audio control knob (4), the modes will be displayed in the following order: Volume, Bass, Treble, Balance and Fader.
Volume
Turn the Audio Control Knob (4) clockwise to increase the volume and counterclockwise to decrease the volume.
Bass
Press Audio Control Knob (4) two times. Turn the Audio Control Knob clockwise to increase the bass and counterclockwise to decrease the bass.
Treble
Press Audio Control Knob (4) button three times. Turn the Audio Control Knob clockwise to increase the treble and counterclockwise to decrease the treble.
Balance
Press Audio Control Knob (4) button four times. Turn the Audio Control Knob clockwise to increase the balance to the right and counter- clockwise to increase the balance to the left.
Fader
Press Audio Control Knob (4) button five times. Turn the Audio Control Knob clockwise to increase the balance to the front speakers and counterclockwise to increase the balance to the rear speakers.
Loud
Enhances high frequency and low frequency sound quality. Press and hold the button “BAND/LOUD” button (13) for more than one second. Either “LOUD ON” or “LOUD OFF” will appear in the display. Select the desired mode.
Equalizer
Press “EQ” button (17) to select preprogrammed equalizer settings in the following order: FLAT, CLASSICS, POP M (Pop), and ROCK M (Rock).
5