Magnadyne MV-VCRUSER02 owner manual Standard Headphone Operation, Headphone Radio Operation

Page 16

Standard Headphone Operation

1

1. Headphone Radio Operation

Your MovievisionTM headphones can be used as an FM radio receiver. Repeat the following procedures to listen to FM radio broadcasts.

A. Move the Power/Selector switch (1) from the OFF posi- tion to the RAD (Radio) position.

B. Rotate the tuning knob (2) to the desired FM radio station.

Note: FM radio stations are always received in Stereo Mode. C. Adjust the volume knob (3) to the desired volume level.

1

PWR

OFF RAD MOV

2. Listening to What is on the Viewing Screen

To use the MovievisionTM headphones with the source select- ed (FM Stereo/Video) repeat the following procedures.

A. Move the Power/Selector switch (1) to the MOV (Movie) position.

B. Rotate the tuning knob (2) until the headphone sound matches what is showing on the viewing screen.

C. Adjust the volume knob (3) to the desired volume level.

Note: If the transmitting frequency has been changed in the screen housing, repeat step “B” to re-tune the headphones.

PWR

OFF RAD MOV

3. Turn OFF the Headphones when Finished

The batteries supplied with your MovievisionTM headphones will last for approximately 10 hours of continuous use. Forgetting to turn “OFF” the headphones, when not in use, will decrease the battery life.

1

PWR

OFF RAD MOV

4. Connecting a Second Set of Headphones

Your MovievisionTM headphones have a plug receptacle locat- ed at the bottom of the “R” ear pad. (4) A second set of per- sonal type headphones (Must have 3.5 mini male type plug) can be connected at this point.

Note: When a second pair of headphones are attached, the tuning and audio level is controlled by the MovievisionTM headphone.

16

Image 16
Contents Patent Pending Important Safeguards Important Safety InstructionsDamage Requiring Service Table of Contents Video Cassette Tape InformationRemote Controls Remote Control Battery Install / ReplaceVCR Controls Using VCR Special Features Programming and SetupVCR Tape Playback Recording Using VCR Special Features Applies to Stereo VCR OnlyOperating a DVD,Camcorder or Game Adjusting the Screen’s Brightness Adjusting the Screen’s Color IntensityViewing Screen Controls and Functions Infrared EyeCar Radio Interface Stereo/Mono SwitchTransmitter Frequency Selection Select Button SEL Up/Down ButtonsViewing Screen Release Menu ButtonPress the Up and Down Buttons to Adjust Backlight Backlight AdjustmentScreen Display Brightness Adjustment Contrast AdjustmentUntil Contrast is Selected Pressthe Menu Button Twice to Exit Screen DisplayHue Adjustment Saturation AdjustmentPressthe Menu Button Once Reset Picture AdjustmentDomelight Operation 10.4 Domelight OperationReplacing Domelight Bulbs Install the Batteries AAA Type Headphone OperationListening to What is on the Viewing Screen Turn OFF the Headphones when FinishedConnecting a Second Set of Headphones Standard Headphone OperationTurn On the Headphones Tuning an FM Radio StationTurn Off the Headphones when you are Finished Digital Headphone OperationCleaning and Maintenance Trouble ShootingWarranty Replacement Parts for MovieVisionTM SystemsReplacement Parts Order Form