Table of Contents

Table of Contents
Important Safety Instructions	2
Important Safeguards	2
Damage Requiring Service	2
Video Cassette Tape Information	3
Remote Control Battery Install / Replace	4
VCR Controls	4
Remote Control	4
Programming and Setup	5
VCR Tape Playback	5
Using VCR Special Features	5-6
Recording	6
Operating a DVD, Camcorder or Game	6
6.4" Viewing Screen Controls and Functions	7-8
10.4" Viewing Screen Controls and Functions	9-13
Domelight Operation	14
Headphone Operation	15
Standard Headphone Operation	16
Digital Headphone Operation	17
Cleaning and Maintenance	18
Trouble Shooting	18
Replacement Parts	19
Warranty	19
Replacement Parts Order Form	20
Video Cassette Tape Information

This VCR will operate with any cassette that has the VHS mark. For best results, we recommend the use of high-quality video cassette. Do not use poor quality or damaged tapes.

Precautions:

•Avoid Moisture. Moisture condensation may occur on the tape if it is moved from a cold location to a warm location or visa versa, Before using a tape with these conditions, to avoid damage of the tape and your VCR, wait until the tape is at room temperature and the moisture has evaporated.

•Avoid extreme heat, high humidity and magnetic fields.

•Do not tamper with the cassette mechanism.

•Do not touch the tape with your fingers.

Inserting a Cassette:

Insert the cassette in the direction as shown. Push in gently, but continuously, on the center-back of the cassette until it is drawn into the VCR. The VCR will automatically turn ON.

Erase Prevention:

You can prevent accidental erasing of a recording by breaking off the tab on the back edge of the cassette.

If you decide to record on the tape again, cover the hole with plastic tape

Removing a Cassette:

1.In the stop mode, press the “EJECT” button on the remote control or press the “STOP/EJECT” button on the VCR. The cassette will be ejected.

2.Pull the cassette out of the cassette compartment.

3.Store the cassette in its case as shown.

Video Cassette Tape Information