Final Positioning

IL60 L/R

Controls and Connections (Cont.)

RED = +

METHOD 4

BLACK = -

1. LOOSEN TERMINALS

2. INSERT BARE END: TIGHTEN TERMINALS

3. SET INPUT SUB 3 TO "LINE LEVEL"

4.SET LOW-PASS FILTER 4

TO "ON"	NO STRIPE= -

After correctly connecting the loudspeaker and verifying that both the subwoofer and main section portions are playing, it is time to optimize the system for your particular listening room.

Earlier, you placed the loudspeakers in their general location. Finding the exact location for optimum performance sometimes only involves moving the speakers a few inches in any direction. We urge you, therefore, to experiment with placement until your speakers deliver their full potential. When the speakers are moved inward (toward each other) there is generally better focus of instruments and vocalists; however, moving the speakers too close together can reduce the spaciousness of the stage effect and you may need to experiment with the trade-off between focus and imaging. If your listening room is larger than average and your listening position is relatively far from the speakers, wider placement of the speakers may be required.

	(ONE CHANNEL SHOWN)
	RECEIVER
	SUBWOOFER
STRIPE = +	OUTPUTS	SPEAKER

L	OUTPUTS
	-	+

AC CORD

00395-4