Bogen M450, BOGEN M300, M600 manual Class Rear Panel

Panel Descriptions

M-Class Rear Panel

1. Low-Impedance Outputs

Accepts up to #10 spade lugs for low-impedance speaker connections.

2. Channel Balance

Only active in Dual Mono mode. Allows one channel’s volume to be adjusted relative to the other channel.

3/4. Effects Loop In/Out

The effects loop connectors provide an insertion point for outboard signal processing equipment when the M-Class is operating in either 70V Mono or Dual Mono mode, where inputs provide a 2:1 mixer function.

5/6. Output Feeds (Pre/Post-EQ)

Two different output feeds are provided that can supply signal to other audio equipment. Both outputs are designed to feed high-impedance, unbalanced inputs of external equipment.The Pre-EQ Output Feed provides a signal before any external signal processing.The Post-EQ Output Feed provides a signal that has been affect- ed by the external signal processing equipment and the lo-cut filter.

7. Operational Mode Selector

The M-Class amplifer has 3 distinct modes of operation (Stereo; 70V Mono; Dual Mono) that are designed to provide a wide range of application coverage. For a description of the different modes, see the Operation sec- tion of this manual.

8. Fan Exhausts

Two independent, variable speed cooling fans respond as needed to keep the amplifier cool and reduce dust build-up.

9. 70V Mono Speaker Output

For 70V constant voltage speaker systems. Provides a single channel of amplification.

10. Chassis Ground

Provides convenient access to earth ground.

11. Lo-Cut Switch

Select a low-frequency roll-off of 65 Hz or 125 Hz for transformer-coupled and horn speakers. Flat position allows full low-frequency performance.

12. Module Bay

Accepts one or two Bogen input modules (one module included with amplifier).

3