Preface
Thank you for purchasing this car audio product.
Please read this manual carefully before operating this car audio product.
Please keep this manual for future use. It will be helpful to you if you are encounter any operational problem.
INSTALLATION
INSTALLATION METHOD
This is an
The main unit wears a METAL MOUNTING SLEEVE.
Please connect the wiring, eg, the Power supply, the Speakers and the Antenna according to the requirements of this Instruction Manual, then install the metal mounting sleeve into the car as per the diagram illustrated below.
Selecting fine audio equipment is only the start of your musical enjoyment. Now it is time to consider how to maximize the enjoyment you will get from knowing how to work your new car stereo receiver.
We hope you enjoy using this product and encourage you to always listen at a moderate, safe sound level to avoid any possible hearing damage or loss. If you listen to excessively loud sound over time, your hearing can adapt to higher volumes and what sounds "normal" to you may be quite harmful and can cause you to have permanent hearing loss. So please practice "safe sound" and always listen at moderate sound levels only.
METAL SUPPORT STRAP | To raise the |
| please ensure the metal support strap is |
| connected firmly to the car chassis. |
DASHBOARD
Bend the tabs on the mounting sleeve against the dashboard with a screwdriver.
UNIT CHASSIS
PLASTIC TRIM RING
Start with your volume control at the lowest setting, and slowly increase the level until you can hear it comfortably and clearly, free from distortion.
Once you have established this comfortable sound level, leave it there.
WARNING!
To reduce the risk of fire or electric shock, do not use the unit in the rain or moisture environment.
To prevent direct exposure to laser beam, do not try open the enclosure. Visible and invisible laser radiation when open and interlocks defeated.
To protect our environment, do not dispose of electrical equipment in the domestic waste. Please return any electrical equipment that you will no longer use to the collection points provided for their disposal.
This helps avoid the potential effects of incorrect disposal on the environment and human health. This will contribute to the recycling and other forms of reutilization of electrical and electronic equipment. Information concerning where the equipment can be disposed of can be obtained from your local authority.
METAL MOUNTING SLEEVE | FRONT PANEL |
To remove the CD player out of the mounting sleeve, |
|
insert the two supplied keys into the left and right side |
|
slots of the chassis at the same time. |
|
Then pull the chassis out of the mounting sleeve as |
|
shown in the illustration. |
|
NOTE
|
| To attach the removable faceplate, insert the right | |
| Remove the two screwsthat protect | side of the faceplate into the right of the CD player | |
Before installing and operating | chassis first. Then push the left side of the face- | ||
the CD player duringtransportation | |||
the CD player,remove the metal | plate into the chassis until you hear it click . | ||
before operating the player. | |||
mounting sleeve illustrated by the |
|
| |
arrows. |
|
|
To removethe front control panelfrom the unit chassis, pressthe REL button.
Page 1 | Page 10 |