INSTALLATION
CONNECTIONS:
1.Verify that your amplifier is stable to 4 Ohms.
2.Follow all installation instructions from the manufacturer of your amplifier.
3.Connect the Positive speaker output from your amplifier to the Positive Twist and Insert terminal indicated by the RED band on the bottom of the terminal.
4.Connect the Negative speaker output from your amplifier to the Negative Twist and Insert terminal indicated by the BLACK band on the bottom of the terminal.
SECURING THE ENCLOSURE TO THE VEHICLE:
CAUTION: TO ENSURE THE SAFETY OF THE VEHICLE
PASSENGERS, IT IS IMPORTANT THAT YOU FOLLOW
THE INSTRUCTIONS BELOW FOR SECURING THE
ENCLOSURE TO THE VEHICLE TO ENSURE THAT THE
SUB BOX DOES NOT MOVE FROM ITS MOUNTING
LOCATION IN THE EVENT OF AN ACCIDENT.
1.Purchase at least two “L” brackets from your local hardware store.
2. Purchase enough 3/4” drywall screws to fill each hole of your “L” brackets.
3.Attach the “L” brackets to either side of the enclosure as the diagram indicates.
4. Locate the area to secure your enclosure in the vehicle. Be sure that the area you have chosen is not near the gas tank, brake lines, wiring or mechanical parts under the vehicle. Pre drill each hole.
5. Attach the enclosure and “L” bracket to the vehicle as shown in the diagram.
L BRACKET | DRYWALL SCREW |
3