REMOTE CONTROL FUNCTIONS
When the DVD player has been selected, this button serves the Random function. When a CD is playing and no playlist is active, each press of this button turns random track selection on or off.
Night Mode/Subtitle: Press this button to activate Night mode with specially encoded Dolby Digital discs or broadcasts. Night mode compresses the audio so that louder passages are reduced in volume to avoid disturbing others, while dialogue remains intelligible.
When the DVD player has been selected, this button performs the Subtitle function. Press it to select a subtitle language or to turn subtitles off.
NOTE: Due to the variations in how DVD discs are authored, the subtitle languages displayed by the DVD 38 may not accurately reflect the actual languages available on the disc. It is recommended that subtitles be selected using the disc’s menu.
Stereo Modes/Repeat: The first press of this button will select
the
When the DVD player has been selected, each press of this button cycles through the available Repeat modes, excluding
Track Skip: These buttons have no effect on the receiver, but are used with the DVD 38 and many other source components to change tracks or chapters.
Dim: Press this button to partially or fully dim the AVR 247’s or DVD 38’s
Transport Controls: These buttons have no effect on the receiver but are used to control the DVD 38 and many other source components. By default, when the remote is operating the receiver, these buttons will control the DVD 38.
Record: This button has no function on the AVR 247 or DVD 38. It is used with many audio and video recorders.
BATTERIES
The RCP 6 remote control uses three AAA batteries, which are included.
To remove the battery cover located on the back of the remote, firmly press the ridged depression and slide the cover toward the top of the remote.
Insert the batteries as shown in Figure 1, making sure to observe the correct polarity.
When using the remote, remember to point the lens toward the front panel of the AVR 247 or DVD 38. Make sure no objects, such as furniture, are blocking the remote’s path. Bright lights, fluorescent lights and plasma video displays may interfere with the remote’s functioning. The remote has a range of about 20 feet, depending on the lighting conditions. It may be used at an angle of up to 30 degrees to either side of the component.
If the remote seems to operate intermittently, or if pressing a button on the remote does not cause the AVR Selector or one of the Input Selectors to light up, then make sure the batteries have been inserted correctly, or replace all three batteries with fresh ones.
Figure 1 – Remote Battery Compartment
8