Fusion CA-CD500 Reasons For Playback Failure, Detachable Front Panel, Removing The Front Panel

Reasons For Playback Failure

-Scratched or flawed CD

-Fingerprints or marks on CD

-CD exposure to extreme sunlight or heat

-CD with a failed recording or open session

-Copy protected CD’s that don’t conform to the audio CD industry standard.

-Only use discs with WMA/MP3/AAC files written in a format that is compatible with this unit.

-Data only tracks contained in a disc will not produce sound when played back.

Windows Media and the Windows logo are trademarks,

or registered trademarks of Microsoft Corporation in the United States and/or other countries.

Apple, the Apple logo, iPod and iTunes are Trademarks of Apple Computer, Inc.,

registered in the U.S. and other countries.

“MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thompson.”

“Supply of this product only conveys a license for private, non-commercial use and does not convey a license nor imply any right to use this product in any commercial (i.e. revenue generation) real time broadcasting (terrestrial, satellite, cable and/or any other media), broadcasting / streaming via internet, intranets and/or other networks or in other electronic content distribution systems, such as pay-audio or audio-on-demand applications. An independent license for such use is required. For details, please visit http://www.mp3licensing.com”

DETACHABLE FRONT PANEL

Removing The Front Panel

RELEASE

1.Press the panel lock button to release the panel.

2.Remove the panel by pulling from RIGHT side.

3.Always store the detached panel in the supplied carrying case when not in use.

Keep in mind

-If any function does not work, remove the front panel and re-attach.

-Do not touch the contact pins on the rear of the front panel, as this can cause contact problems and they do become hot through normal use. If the contacts should become dirty, they can be cleaned carefully with a soft cloth.

-Do not expose the front panel to extreme heat or cold.

-Petrol and other solvents must not come into contact with the front panel.

-The front panel must not be pressed hard, or dropped.

-Never take the front panel apart.

Attaching The Front Panel

1.Hold the panel at its top and bottom edges.

2.Insert the left side of the panel in first. Then press the right-hand side in, to secure.