CD Operation

MP3 Insert / Eject

To open the face of the head unit, press and hold the TILT/EJECT button for 3 seconds. Remove / insert the CD into the slot.

Press the SOURCE button to select CD mode.

Radio - CD - iPod - AUX

Or CD will play automatically once inserted

CD Insert / Eject

To open the face of the head unit, press and hold the TILT/EJECT button for 3 seconds. Remove / insert the CD into the CD slot.

Previous / Next Track

To change a track;

-Push the joystick left (previous track) or right (next track) OR

-Turn the joystick encoder left (previous track) or right (next track)

Fast Forward / Rewind

To fast forward or rewind a track;

-Push and hold the joystick left (rewind) or right (fast forward)

Pause

-Press the VOLUME button to pause the CD while playing.

-Press the VOLUME button again to resume playing.

CD Play Code Errors

-If a problem should develop while operating the CD player, an error code (ER-01 ~ ER-02) may appear on the display panel. This can indicate a number of problems with the unit, including a mechanical error or an error in the microprocessor control of the player.

-If an error code should appear, try ejecting and re-loading the disc into the player. While the disc is out of the unit, make sure it is clean, undamaged, and loaded correctly (label surface up).

iPod® OPERATION

iPod Connect

Connect the iPod cable to the iPod port in the rear panel, and then connect the iPod to the cable

iPod Mode Selection

Press the SOURCE button to select iPOD mode.

Radio - CD - iPod - AUX

iPod Operation

The joystick encoder operates in the same manner as the clickwheel on the iPod.

-Press joystick to enter menu

-Turn the joystick encoder to scroll through menu options

-Press the joystick to select a menu option

-Press menu Button to return to the previous menu