
LOC* ON/OFF
(Local/Distance). Use this setting to Auto Seek to strong local stations (Local) or all stations regardless of their strength (Distance).
AREA
Select your country/region for the tuner: OCEANIA (Australia/New Zealand); USA; EUROPE;
RUSSIA & press ESC/RGB | to save. |
CLK (Clock)
To set the clock, rotate the Encoder Volume Control to set the hours (Note “A” or “P” will be displayed in the
CLK 12H/24H (Clock Format)
Select the time format 12H or 24H
BEEP ON/OFF
Select On or Off to activate button confirmation beep tones.
DEMO ON/OFF
Demo mode is activated when the unit is first connected to the vehicle, but is
COL0UR
This unit is equipped with a 32K+ RGB variable colour display. By rotating the Encoder Volume Control, you can select the system colour from the following options:
COLOUR SCAN (default setting); WHITE; GREEN 1; GREEN 2; GREEN 3; AMBER; PINK 1; PINK 2; PURPLE 1; PURPLE 2; BLUE 1; BLUE 2; USER; ORANGE
USER (USER SELECTED COLOUR):
This allows you to select your choice of display colour from over 32,000 combinations (32K+). When you select USER in the colour menu, press the Encoder Volume Control to then rotate to select the intensity or Red, Green & Blue (from between 0 and 32) to make your own custom colour.
To switch between R (Red), G (Green) and B (Blue) setting modes, push the TUNE UP button ![]()
Press ESC/RGB button once you have completed your selection.
RADIO OPERATION
TUNE INTO A RADIO STATION
1.Press the SOURCE button
repeatedly until [RADIO] is displayed on the LCD screen.
2.Select your preferred listening Band (FM or AM) by pressing
BAND
. There are 3 FM Bands [FM1] [FM2] [FM3] and 2 AM Bands [AM1] [AM2]. These multiple Bands allow you to store up to 18 FM stations & 12 AM stations in memory (see below).
3.To search for a radio station, press either the TUNE UP or
DOWN ![]()
![]()
buttons to search for the next station higher than the current station frequency or lower than the current frequency.
4.To Manually tune to a radio station, press and hold either the
TUNE UP or DOWN ![]()
![]()
button until the tuner frequency on the LCD display starts flashing. You can then release the TUNE
10