Operation

Power

Press the front panel POWER switch to apply power. Adjust the volume to the appropriate level using the amplifier volume control.

To Select a Band

Press the button marked BAND. The current band appears on the display: FM1, FM2, FM3, AM1 or AM2.

You can preset up to six stations on each band for a total of 30 preset stations (18 FM and 12 AM).

To Tune a Station

Press the UP or DOWN buttons.

To Preset Stations

1.Select a band and tune the first desired station.

2.Press one of the “M” buttons; for example, M1 (The preset number appears on the display as CH1).

3.Continue pressing the “M” button until the program material from the speaker stops for a second and then resumes. This indicates that the preset is stored.

4.Tune the next station and repeat Steps 2 & 3 for the 2nd through 6th preset.

To Scan Preset Stations

1.Select a band. The first preset station (CH1) will appear on the display.

2.Press the button marked MSCAN. Each preset station will play for 5 seconds in turn while scanning.

3.To stop the scanning, press the “MSCAN” button again.

Program Selection

Use the AUX/TUNER button to select program from the tuner or aux source. Push in for Aux program. Push out for Tuner pro- gram