Specifications, Amplifier, Speaker, English

ENGLISH

Specifications			Caution: Read this page carefully to ensure safe operation.
Type	Subwoofer system with built-in amplifier
[Amplifier]				[Speaker]
Rated Output Power		50 W RMS (100 Hz, 0.1%, 4Ω)		Enclosure	Bass-Reflex, Floor Standing Type
Input Sensitivity & Input Impedance			100 mV / 43 kΩ	Speaker Units	160 mm (6-1/2 ") Cone type
		200 mV / 43 kΩ (MONO)		Nominal Impedance	4 Ω
Rated Power Consumption		........................................	50 W	Dimensions
				Width	: 290 mm (11-7/16 ")
				Height	: 300 mm (11-13/16 ")
				Depth	: 420 mm (16-9/16 ")
				Net Weight	10 kg (22.0 lb)
				Supplied accessories
				Pin-plug cord	1
				Cushion	4
				NOTE: DO NOT REMOVE THE GRILLE.

Notes:

1.Kenwood follows a policy of continuous advancements in development. For this reason, specifications may be changed with- out notice.

2.Full performance may not be exhibited in extremely cold locations (below 0 deg. C).

Specifications