XDA-1 Rear Panel Layout

14. Input Indicator LEDs

LEDs above each selectable button illuminate when the labeled function is engaged. When receiving commands, the COM/RECV LED illuminates as well.

(for larger image, see page 22)

1.LINE AUDIO OUTPUTS Section (from left to right)

•XLR RIGHT OUTPUT

•XLR LEFT OUTPUT

•RCA LEFT OUTPUT

•RCA RIGHT OUTPUT

2.DIGITAL AUDIO INPUTS Section (from left to right)

•AES/EBU

•CO.1

•CO.2

•OPT.1

•OPT.2

•USB.

3.TRIGGER IN/OUT

3.1 TRIGGER INPUT

Allows a mono to mono 3.5mm cable to remotely trigger the XDA-1 on and off. Current is limited to 500ma

3.2 TRIGGER OUTPUT

Allows a mono to mono 3.5mm cable to remotely trigger another device on and off, along with the XDA-1. Current is limited to 500mA, which is sufficient to trigger two devices. For triggering more devices, you may want to use a separate triggering device, like the Emotiva ET-3.

4. Main Power Switch

This rocker switch provides the master power for the XDA-1. After it is in the ON position, the XDA-1 can be turned on manually from the front panel switch, remote control, or automatically with the trigger input via a 3.5mm input jack.

5. Power Receptacle

Uses standard IEC power cord.