Gemini CDJ-505 manual Specifications, General, Audio Section

							CDJ-505
	FUNCTIONS: (CONTINUED)		21		USB PORT The USB port allows the connection of any USB mass stor-
12		BPM: Press and hold the BPM button to turn on the BPM read out, once			age device*.
		on you may TAP the button to the beat of the music, after a few TAPS			USB/CD SELECT BUTTON The USB/CD select button allows you to
		the display will read out the average BEATS PER MINUTE of the track.	22
					toggle from the CDJ-505internal CD drive and the mass storage de-
13		PGM: Allows you to create a set playlist. To program a set list into the			vice connected to the USB port.
		CDJ-505memory, begin by stopping the unit from play and pressing	23		TRACK SELECTION ROTARY: The TRACK SELECTION ROTARY
		PGM to begin the set list. Select a track by using the track selection but-
		ton to scan to the first track to be placed in the set list.			allows you to navigate through folders or search through tracks
					depending on weather you are in USB mode or CD mode.
		When you have selected the proper track press PGM and the
		CDJ-505will be ready to set your next selection. Repeat the previous			In CD mode the rotary can search through cd tracks, turning the
		steps until you have completed your playlist, then press play to begin
					rotary to the right or clock-wise advances the selection, and turning
		the set list.
					the rotary to the left or counterclock-wise decreases the selection.
14		PITCH: Pushing and holding the PITCH button (the button will light up)			Once you have found your selection you can load it for play by
		activates the PITCH CONTROL SLIDE. You can then select which PITCH
		percent you want by pressing the PITCH button and choosing either +/-			pressing the ROTARY knob to confirm your selection.
		8%, 12% and 24% depending on which LED is illuminated. Push and			In USB mode the ROTARY knob allows you to search through folders
		hold the PITCH button again to deactivate this mode.
					and navigate through music libraries on your USB device, Simply ro-
15		PITCH CONTROL SLIDE: Moving the PITCH CONTROL SLIDE			tate the rotary until you find the desired folder and push the rotary
					in to choose that folder, continue to search in this manner until you
		up or down will lower or raise the pitch percentage up to + or - 24%			find the desired track, then just like in CD mode press the rotary
		depending on the PITCH BUTTON setting.
					again to load and play the desired track.
16		PITCH BEND: Pushing the PITCH BEND BUTTONS will automatically
					NOTE : ONCE YOU HAVE SKIPPED TO ANOTHER TRACK, YOU MAY NOT GO BACK TO YOUR PROGRAMMED CUE POINT.
		bend the pitch up to +26% or bend the pitch down to -26% depending
					YOU MUST BEGIN YOUR CUE SELECTION OVER AGAIN, THE CUE WILL BE PRESET TO THE BEGINNING OF THE NEWLY
		on the setting of the PITCH BUTTON. Releasing the buttons will return			SELECTED TRACK.
					We recommend that you use a MASS STORAGE DEVICE that is no
		the pitch to the original pitch setting. You can use this function to match	*
		the beat when mixing from one song to another.			larger than 2 gb and that only has less than 100 folders with less
					than 1000 songs in any one folder. larger drives will work but they
17		LOOP SECTION: A LOOP repeats the section between the entry point			will greatly affect the time in which it takes to search and or load a
		(IN) and the exit point (OUT). To set a loop while the unit is playing,			song.
		start by pressing the IN BUTTON (it will light up) and when you reach		SPECIFICATIONS:
		the desired end loop point press the OUT BUTTON (it will also light up).
		The loop will continue playing until you press the OUT BUTTON again
					GENERAL:
		allowing the music to continue from that point on, to re-engage the loop
		you must press the RELOOP BUTTON. When you have released your			Type		Compact Disc Player & USB Mp3 Reader
		loop the OUT BUTTON will turn OFF and the IN BUTTON will remain lit
					Disc Type		Standard Compact discs (12 cm & 8 cm)
		to indicate that your loop is stored in the CDJ-505memory. Pressing the
					Time Display	Track Elapsed, Track Remain, or Total remain
		IN BUTTON again while the unit is playing will erase the previously
					Variable Pitch		± 24% Slider with Resume Switch
		saved loop while saving your new loop entry point. Press OUT to exit
					Pitch Bend			± 26% Maximum
		the loop and save a new complete loop.Press RELOOP to return to the
					Instant Start			Within 0.03 seconds
		beginning of the previously saved loop from normal play. Press
					Installation			Table top
		RELOOP repeatedly to cause the loop to stutter.
					Dimensions:		11.0" x 3.5" x 11.75"
							(279.4 mm x 88.9 mm x 298.4 mm)
		NOTE: THE FIRST LOOP WILL HAVE A PAUSE AT THE EXIT POINT,			..............................................................
					Weight Per Unit			5.78 lbs. (2.62 kg)
		WHILE ALL OTHERS WILL BE SEAMLESS.
18		PLAY/PAUSE: Each press of the PLAY/PAUSE BUTTON			AUDIO SECTION:
		causes the operation to change from PLAY to PAUSE or from PAUSE			Quantization		1 Bit Linear/Channel, 3 Beam Laser
		back to PLAY. The PLAY/PAUSE BUTTON remains lit when in PLAY
					Oversampling Rate			8 Times
		mode, while it blinks in PAUSE mode.
					Sampling Frequency			44.1 kHz
19		CUE: While the unit is playing and after the cue point has been			Frequency Response			20 Hz to 20 kHz
					Total Harmonic Distortion			Less Than 0.05%
		programmed, pressing CUE will cause the CD player to enter the			Signal to Noise Ratio			85 dB
		PAUSE mode (PLAY/PAUSE BUTTON blinks) at the programmed cue
					Dynamic Range			85 dB
		point (the CUE LED is lit). Holding down the CUE button
					Channel Separation			85 dB (1 KHz)
		changes the function to preview , and allows you to stutter start or play
					Output Level			2.0 +/- 0.2V R.M.S.
		from the programmed CUE POINT Releasing the CUE button will return
					Power Supply		AC 115/230V, 60/50 Hz
		the CD to the preset CUE point.
20		REPEAT: Press the repeat button once to engage (1) or repeat the			SPECIFICATIONS AND DESIGN ARE SUBJECT TO CHANGE WITH-
					OUT NOTICE FOR PURPOSE OF IMPROVEMENT.
		selected track. Press REPEAT again to engage ALL setting which will

repeat all the tracks on the CD. Press REPEAT again to disengage the repeat function.

5