Genesis Advanced Technologies 2.2 manual Midrange/Tweeter Connections

Page 11

absolute fidelity

Servo-Bass Interconnects

parallels speaker cable inputs

lettering.

When you connect the woofer tower outputs pay close attention to the way the connector works. It only goes in one way and you cannot put it in wrong. However, you can fail to put it in all the way or fail to lock it in place. Line up the alignment pins on the connectors, push the plug in, and twist it clockwise until the lock "clicks" in place to keep it there. By looking carefully, it will be obvious as to how it works.

At the AMPLIFIER end of the servo-bass cable, you will find a male 1/8” jack. The female end is on the chassis of the servo-bass amplifier labelled GND. These jacks are used for grounding an internal shield within the servo-bass cable. For the time being, leave this shield disconnected. The shield ground should be used only when necessary.

Midrange/Tweeter Connections

Next, connect the mid/tweeter panels to your power amplifier using a pair of high quality loudspeaker cables (not supplied) to the 5-way binding posts. We recommend using good quality spade connectors for this job.

There are two ways to get the music signal from your hifi

system to the Servo-Controlled Bass Amplifier to drive the woofers. The first, and preferred way is to drive it using the output of the power amplifier that is driving the midrange/ tweeter panels using the supplied pair of Servo-Bass Interconnects.

The Servo-Bass Interconnect will be supplied with a pair of banana plugs at one end, and an XLR balanced male plug at the other end. The banana plugs will plug straight into the binding posts of the G2 midrange/tweeter tower inputs when you are using speaker cables with spade connectors. If your speaker cables use banana plugs, you can order spade connectors with the SBI at no extra charge when you order your loudspeakers.

The XLR connector contains a specially developed internal

7

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Two Absolute fidelity Message from Genesis Iii Set-up Guide Planning the PlacementAbsolute fidelity Unpacking Assembling the Acoustic Suspension Servo-Controlled Bass Amplifier Red lettering, and the other in white Midrange/Tweeter Connections Servo-Bass Amplifier Remote Bass Control Adjustments Absolute fidelity Midrange/Tweeter Controls Word about Finish Servo-Controlled Bass Amplifier ProtectionBegin with the bass level Tuning the systemImaging and Soundstage Phase Control Further adjustments Make One Change At a Time Refinement stageAppropriate Mid-bass/Low-bass Balance Defining the SoundstageRoom Treatment Mastering the Refinements of the system Absolute fidelity Design Philosophy TechnologyAbsolute fidelity 48inch midrange ribbon Genesis Ribbon TweeterServo-bass Advantage Woofer Tower Servo-controlled Bass Amplifier Acoustic Suspension Specifications
Related manuals
Manual 2 pages 47.92 Kb

2.2 specifications

Genesis Advanced Technologies 2.2 represents a significant leap in the realm of high-fidelity audio reproduction, offering enthusiasts and professionals alike a unique auditory experience that encapsulates both innovation and excellence in sound engineering. This state-of-the-art audio platform is designed to deliver unparalleled sound quality, employing a range of cutting-edge technologies and features that cater to the discerning listener.

At the heart of Genesis Advanced Technologies 2.2 is its proprietary driver technology, which utilizes advanced materials and engineering principles to produce a more accurate and dynamic sound signature. The drivers are designed to minimize distortion while maintaining clarity across a wide frequency range. This is complemented by an exceptionally robust cabinet design that reduces unwanted resonances, ensuring that the sound remains pure and uncolored.

One of the standout features of Genesis 2.2 is its integration of digital signal processing (DSP). This technology allows for precise sound tuning and customization, enabling users to tailor their listening experience according to personal preferences or room acoustics. The DSP capabilities provide options for equalization, crossover adjustments, and time alignment, allowing for a seamless blend between various audio frequencies.

Another significant characteristic of the Genesis Advanced Technologies 2.2 is its compatibility with various audio sources. The platform supports high-resolution audio formats, making it a perfect choice for audiophiles who prioritize high fidelity in their listening experiences. Whether streaming from a digital source or playing back from physical media, the system ensures that every detail is captured with remarkable clarity and depth.

In addition to its audio performance, Genesis 2.2 is designed with user experience in mind. The interface is intuitive, allowing users to navigate settings and make adjustments with ease. Its sleek design not only enhances its aesthetic appeal but also ensures that it fits seamlessly into any modern audio setup.

Overall, Genesis Advanced Technologies 2.2 embodies a commitment to audio excellence. With its emphasis on innovative technology, customizable sound profiles, and high-quality construction, it stands out as a premier choice for anyone seeking to elevate their listening experience. Whether for personal enjoyment or professional use, the Genesis 2.2 is poised to redefine expectations in the world of high-fidelity audio.
Top Page Image Contents