Genesis Advanced Technologies 2.2 manual Woofer Tower

Page 30

absolute fidelity

moving and applies a counter-signal to stop the woofer faster and more effectively than an open loop woofer could possibly respond.

Thus, the servo-drive reduces distortion and improves transient response by making the woofer appear to be massless. Typical non-servo woofer systems have distortion levels that exceed 10% at even moderate levels. The Genesis servo bass system reduces this distortion to below one percent at almost any output level. The system also drives the woofer to constant acceleration, which makes the frequency response of the woofer anechoically flat to the lowest frequencies.

The Woofer Tower

The transducer used in a servo system must be strong enough to withstand the high current approach of the servo, and yet delicate and light enough to react extremely quickly. The G2.2 features a total of four front- and four rear-firing 8-inch woofers per channel – a total of sixteen woofers in the system.

While the servo system is able to ensure that the driver works linearly as a perfect piston, it is unable to correct for distortion caused by cone wobble, bending, and break-up. Hence, the drivers were designed to minimize these non-linear distortions.

The woofers are a uniquely designed metal cone driver made for the Genesis servo system. Made with a cone of solid aluminium, the suspension and voicecoil have been maximized for long distortion-free excursion so as to increase dynamic range. Our aluminium cones are a magnitude stiffer than any plastic cone on the market, and virtually eliminate the problems caused by cone bending and break-up.

The lowest break-up mode in the woofer (where there can be any chance of distortion at all) is at 6,000Hz – far above the 16Hz to 120Hz frequency range that these drivers operate at. Therefore, the driver is a perfect piston within the frequencies used. Thus, extremely low cone break-up distortion is inherent in the driver that is designed for the Genesis servo-bass system.

Unlike the midrange and the tweeters, the front and rear woofers operate in phase as a bipolar arrangement in which all sixteen operate in unison to control the air mass of the entire room. This means that the surface area of the eight cones and the large

26

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Two Absolute fidelity Message from Genesis Iii Planning the Placement Set-up GuideAbsolute fidelity Unpacking Assembling the Acoustic Suspension Servo-Controlled Bass Amplifier Red lettering, and the other in white Midrange/Tweeter Connections Servo-Bass Amplifier Remote Bass Control Adjustments Absolute fidelity Midrange/Tweeter Controls Servo-Controlled Bass Amplifier Protection Word about FinishTuning the system Begin with the bass levelImaging and Soundstage Phase Control Further adjustments Refinement stage Make One Change At a TimeDefining the Soundstage Appropriate Mid-bass/Low-bass BalanceRoom Treatment Mastering the Refinements of the system Absolute fidelity Technology Design PhilosophyAbsolute fidelity Genesis Ribbon Tweeter 48inch midrange ribbonServo-bass Advantage Woofer Tower Servo-controlled Bass Amplifier Acoustic Suspension Specifications
Related manuals
Manual 2 pages 47.92 Kb

2.2 specifications

Genesis Advanced Technologies 2.2 represents a significant leap in the realm of high-fidelity audio reproduction, offering enthusiasts and professionals alike a unique auditory experience that encapsulates both innovation and excellence in sound engineering. This state-of-the-art audio platform is designed to deliver unparalleled sound quality, employing a range of cutting-edge technologies and features that cater to the discerning listener.

At the heart of Genesis Advanced Technologies 2.2 is its proprietary driver technology, which utilizes advanced materials and engineering principles to produce a more accurate and dynamic sound signature. The drivers are designed to minimize distortion while maintaining clarity across a wide frequency range. This is complemented by an exceptionally robust cabinet design that reduces unwanted resonances, ensuring that the sound remains pure and uncolored.

One of the standout features of Genesis 2.2 is its integration of digital signal processing (DSP). This technology allows for precise sound tuning and customization, enabling users to tailor their listening experience according to personal preferences or room acoustics. The DSP capabilities provide options for equalization, crossover adjustments, and time alignment, allowing for a seamless blend between various audio frequencies.

Another significant characteristic of the Genesis Advanced Technologies 2.2 is its compatibility with various audio sources. The platform supports high-resolution audio formats, making it a perfect choice for audiophiles who prioritize high fidelity in their listening experiences. Whether streaming from a digital source or playing back from physical media, the system ensures that every detail is captured with remarkable clarity and depth.

In addition to its audio performance, Genesis 2.2 is designed with user experience in mind. The interface is intuitive, allowing users to navigate settings and make adjustments with ease. Its sleek design not only enhances its aesthetic appeal but also ensures that it fits seamlessly into any modern audio setup.

Overall, Genesis Advanced Technologies 2.2 embodies a commitment to audio excellence. With its emphasis on innovative technology, customizable sound profiles, and high-quality construction, it stands out as a premier choice for anyone seeking to elevate their listening experience. Whether for personal enjoyment or professional use, the Genesis 2.2 is poised to redefine expectations in the world of high-fidelity audio.
Top Page Image Contents