B.
A. |
Figure 4
Depending upon the mounting method you select, the mount should be assembled as described in one of the following two sections. In choosing a mounting location, be sure that position chosen will not block access to the Lock and FM FM buttons on the side of the vehicle dock.
Console Mount Method (A)
To assemble and mount the vehicle dock for the console mount method A as shown in Figure 4:
1.Attach the adhesive foot to the vehicle dock using the provided screws, placing the finger grip between the adhesive foot and the vehicle dock. (Figure 5)
2.Before adhering the mount to the console, be sure to select your mounting position care- fully because once the mount has been adhered to a surface, it will not be possible to remove it and adhere it again.
3.Clean the selected mounting surface area in the vehicle with the alcohol swab.
4.Unscrew the adhesive foot from the mounting bracket. Peel the protective material off the adhesive on the foot and press the foot firmly against the vehicle surface.
5.The adhesive mount should then be allowed to adhere for a minimum of
[ Installation ] 17