Pressing the Jump button again while the ST5 is actively searching for a traffic report will cancel the search.
Pressing the Jump button after the ST5 has tuned to the traffic report channel will return you to the previous channel.
Other channel: If you’ve set the Jump button to the JUMPSET option, pressing the Jump button will immediately tune to the channel you preset into the JUMPSET. The Jump icon will be displayed in the lower right corner of the display screen to indicate that the Jump preset channel is currently tuned (see Figure 84).
Figure 84
Pressing the Jump button again will return to the previous channel.
NOTE: THE CHANNEL PRESET FOR THE JUMP BUTTON REMAINS THE SAME REGARDLESS OF WHICH PRESET MEMORY BANK IS CURRENTLY SELECTED.