Scheduled Recordings
Recordings
backhome
optionsdisplay
Recording allows you to schedule the Stiletto 2 to record programming at a set date and time. Each recording session may be up to 6 hours in length, and may be set up as a one time or repeating event. In order for a scheduled recording to occur, the Stiletto 2 must have adequate power and be able to receive the SIRIUS signal from the satellites or terrestrial transmitters. If the Stiletto 2 is on or in sleep mode, the Stiletto 2 will automatically turn to the correct channel and begin recording. If no signal is present at the time the recording is scheduled to start, the recording will be skipped.
Completed scheduled recordings will be found in the Library. To access your scheduled recordings, from the Main Menu go to Library SIRIUS Recordings.
65Operation
SIRIUS9471 SL2 Manual_091207.ind65-66 65-66
Scheduling a Recording
To schedule a recording, select Setup New Recording from the Recording menu. (Figure 26) If have not already set your time zone, you will be prompted to set it. (Figure 27)
The New Recording screen allows you to set the parameters of the recording. (Figure 28) Use the Media Dial to highlight a parameter and press the Select Button. Then use the Media Dial to scroll the list until the correct selection is highlighted, and press the Select Button to select it. When complete, select Done.
Figure 26 | Figure 27 |
| Figure 28 | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
New Recording Screen | Set Time Zone | Select Channel |
Operation 66