6. SIRIUS OPERATION
Selecting SIRIUSSIRIUS SATELLITE RADIO modes
Press the [SAT] button or the [FNC] (FUNC) button to select the SIRIUS mode. The SIRIUS indication lights up when SIRIUS mode is selected.
Notes:
•The [SAT] button selects the SIRIUS mode directly. Some head units do not have a [SAT] button. If not, press the [FNC] (FUNC) button until SIRIUS is selected.
•The [FNC] (FUNC) button selects the external devices connected to the source
unit in order, for example: AM/FM mode DAB mode SIRIUS mode CD mode CD changer mode etc.
Selecting a band
Press the [BND] button to select a band. Each press of the button changes the display as shown below.
SR1 SR2 SR3 SR1 …
The currently received band is displayed in the function mode indication. Models without a function mode indication display the band name and channel number in the display.
Information displayed during reception
The following information is displayed when SIRIUS Satellite Radio cannot be received normally.
•UPDATING: when the receiver is turned on the first time or after a reset. Do not turn power off during this time as the receiver is downloading the channel guide.
•ACQUIRING: when there has been a temporary loss of signal and the receiver is attempting to reacquire a signal. (“LINKING” is shown on an
•INVALID CH: a channel without a broadcast has been selected
(“INVLD CH” is shown on an
•NO
•ANTENNA: no antenna is connected or there is a problem with the antenna
Switching the display
1. Press the [DISP] (D) button to select the desired display.
The main display or the clock display appears each time you press the [DISP] (D) button.
2.In the main display, press and hold the [DISP] (D) button for 1 second or longer to cycle between the following display modes:
Channel name song title artist name category name channel name
…
Notes:
•The display shows the abbreviated channel name for 2 seconds when a station is selected before returning
to the chosen display mode.
•Scrolling starts when the channel name or other text has been displayed for 2 seconds. When scrolling finishes, the initial characters appear. To start scrolling again, press the [ADJ] button.
11