2.PRECAUTIONS
1.Upon initial startup or when starting after turning off the backup power supply, the receiver will take longer to play audio and may take up to 30 seconds after reception of the SIRIUS signal before audio is heard.
2.Channel names are stored in memory 30 to 60 seconds after start of normal operation. If the power is turned off before the text data is written, it may not be correctly displayed on the next power up. Perform a reset operation if no text data is displayed.
3.If the receiver ever stops functioning or appears unresponsive, reset it.
Resetting: Disconnect the SIRIUS Receiver power cable (the CeNET cable if connected to the CeNET and the
4.A CeNET and standalone operation switch is provided on the underside of the receiver. The switch is set to CeNET position at the time of shipment. Do not set this switch to the standalone position when using the CeNET cable (headunit operation).
5.The receiver becomes warm during operation; this is normal and not a cause for concern.
6.Do not touch the connector pins on the receiver as this may damage the ICs inside the unit.
7.No station is selected when the [adj] or [disp] button is pressed quickly after a channel is changed. This is because button operations are not accepted until the channel is confirmed. It takes between 1.5 to 5 seconds to change channels.
This equipment has been tested to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to consult the dealer or an experienced radio/TV technician for help.
CAUTION
USE OF CONTROLS, ADJUSTMENTS, OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
THE COMPACT DISC PLAYER or
COMMANDER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE TECHNICIANS.
CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. INFORMATION FOR USERS:
CHANGES OR MODIFICATIONS TO THIS PRODUCT NOT APPROVED BY THE MANUFACTURER WILL VOID THE WARRANTY AND WILL VIOLATE FCC APPROVAL.
2