Panasonic CQ-5302U operating instructions Speaker Connections, Product Servicing, Chassis

Page 42

Speaker Connections

Caution: Please follow the instructions given below. Failure to do so will cause damage to the unit and speakers.

 

 

<Right>

L +

(White)

+

 

-

 

-

 

(White

 

 

w/black stripe)

 

+

(Gray)

R

+

-

-

 

 

(Gray

 

 

w/black stripe)

<Wrong>

•Use ungrounded speaker only.

•The maximum speaker input should be 37 W or more. (If used with the optional power amplifier, the speaker input should be higher than the maximum amplifier output.)

•The speaker impedance should be 4 - 8 Ω.

•This unit uses the BTCL circuit, so each speaker should be connected separately using parallel vinyl insulated cords.

•The speaker cords and the power amplifier unit should be kept away (about 30 cm apart) from the antenna and antenna extension cord.

L

+

+

-

-

 

Chassis

+

+

R -

-

Chassis

•Never connect the speaker cord to the body of the car.

L

+

+

L

+

+

+

-

-

-

-

-

 

+

+

 

+

+

+

R -

-

R -

-

-

• Do not use a 3-wire type speaker

• Do not connect more than one

system having a common earth

speaker to one set of speaker

lead.

leads.

Product Servicing

If the suggestions in the charts do not solve the problem, we recommend that you take it to your nearest authorized Panasonic Service center. The product should be serviced only by a qualified technician.

Maintenance

Your product is designed and manufactured to ensure the minimum of maintenance. Use a soft cloth for routine exterior cleaning. Never use benzine, thinner, or other solvents.

Caution

This product is designed without a fuse inside due to fuses already exist in your vehicle. We would recommend to use fuses of the specified rating (10 A). Using fuses that exceed the prescribed capacity could cause this product to start smoking, ignite or other malfunction.

If your vehicle is without the fuse or a circuit braker to protect this unit ,please your dealer add the specified fuse 10 A or a circuit breaker at the BATTERY lead of your vehicle's harness. please see page 47 to find out where "BATTERY + 12 V" is for your dealer adding the fuse or the circuit breaker.

42

CQ-5302U

Page 41 Page 43
Image 42
Page 41 Page 43
Contents CQ-5302U Safety Information Observe the following warnings when handling this unitObserve the following warnings when installation Observe the following cautions when handling this unit Observe the following cautions when installationFollowing applies only in the U.S.A FCC WarningService in Puer to Rico Customer services DirectoryAccessory Purchases Npcparts @panasonic.comLimited Warranty Panasonic Consumer Electronics CompanySirius Satellite Broadcast service Connectable DevicesAbout XM Contents Volume Power and Sound ControlsPower MuteSQ Sound Quality Audio Modes Selecting the Clock Display Clock AdjustmentTime Readjustment Initial TimeSeek Tuning Radio ModeManual Tuning RadioManual Preset Memory Radio Preset Station SettingAuto Preset Memory APM Preset Station CallingTuning in a Weather Band Station Weather Band StationsCD/MP3 Player Disc slotSource Disc Player MP3 disc Operation FlowDisc Player CD-DA disc Press Band yCD Text Display Player Source DisplayDisc Player Disc Player MP3 disc CD-DA disc ID3 Tag ON/OFFRepeat Random, Repeat, ScanPress 6 Random Press 5 RepeatCD Changer Control Scan Play Tracks Discs Repeat Play Random Play Check of XM Satellite Radio ID XM ControlGetting Started Activate the XM Satellite RadioXM Mode Channel SelectionManual Preset Memory Error display Rely on Sirius rocket science for superior Coverage What is Sirius Satellite Radio?Sirius Control Check of Sirius Satellite Radio IDSirius Mode Manual Preset Memory SR ID Confirmation System Control Mode Push the knob SEL for more than 2 secondsError display SR ID ConfirmationPress button 1 to 6 to enter a new 4-digit pass code number Enter the new 4-digit pass code number againError display Troubleshooting CommonRadio Sound Setting MP3XM Receiver Sirius Satellite Radio Error Display Messages CD/MP3 CD changerMaintenance Cleaning this Unit¡ Mpeg 1 audio layer 3 Bit rate 32 k-320 kbps VBR Yes Supported file systemsCompression formats ¡ Mpeg 2 audio layer 3 Bit rate 8 k-160 kbps VBR Yes¡ MP3 ID3 tag ¡ MP3Speaker Connections Product ServicingChassis Installation Guide OverviewPlease refer to the Warning statement above Installation Hardware InstallationDashboard Installation Using the rear support strap tMounting springs C Battery terminalInsert Mounting Collar q into ExampleTo Remove the Unit from the vehicles dashboard Wiring Diagram Electrical ConnectionsExample combination CQ-5302U RearXM ANT XM/SIRIUS control connector 10P connector Specifications

CQ-5302U specifications

The Panasonic CQ-5302U is a versatile and reliable car audio receiver designed to deliver an exceptional sound experience while incorporating modern technology features. As a part of Panasonic's commitment to providing high-quality audio equipment, this model stands out in the competitive automotive audio market.

One of the defining features of the CQ-5302U is its compatibility with multiple audio formats. It supports not only CD playback but also offers options for MP3 and WMA formats. This flexibility allows users to enjoy their favorite music in various formats, making it perfect for those who value a diverse music library. The unit's digital AM/FM tuner ensures that listeners can access a wide range of radio stations, enhancing the overall entertainment experience on the road.

The CQ-5302U is equipped with an easy-to-read LCD display, providing clarity and functionality. The intuitive controls are designed for user convenience, allowing drivers to operate the device effortlessly while on the move. The rotary knob and well-placed buttons enable seamless navigation through tracks and settings, ensuring that drivers can focus on the road ahead.

Powering the CQ-5302U is a robust built-in amplifier that delivers clear and powerful sound. With its 200 watts maximum power output, the receiver can drive speakers efficiently, creating a rich audio environment that enhances any journey. Additionally, it features a built-in equalizer, giving users the ability to tailor the sound to their preferences for a personalized listening experience.

Connectivity is another strong point of the CQ-5302U. The receiver includes an auxiliary input, allowing users to connect external devices, such as smartphones or portable media players, directly to the unit. This feature promotes versatility and accessibility, making it easy to play music from various sources without hassle.

In terms of design, the Panasonic CQ-5302U boasts a sleek and modern look that seamlessly integrates into most vehicle interiors. Its robust build quality ensures durability, while the straightforward layout appeals to users seeking simplicity without sacrificing performance.

Overall, the Panasonic CQ-5302U is an excellent choice for anyone looking to upgrade their vehicle's audio system. With its combination of format compatibility, powerful sound output, user-friendly interface, and modern design, this receiver addresses the needs of music enthusiasts and casual listeners alike. This model exemplifies Panasonic's dedication to providing high-quality audio solutions for a superior in-car listening experience.
Top Page Image Contents