Panasonic CQ-5302U Preparation, Dashboard Installation, Installation Hardware

Page 44

Installation

❐Preparation

Warning

If your vehicle is equipped with air bag and/or anti- theft systems, specific procedures may be required for connection and disconnection of the battery to install this product.

Before attempting installation of this electronic component, contact your vehicle dealer or manufacturer to determine the required procedure and strictly follow their instructions.

FAILURE TO FOLLOW THE PROCEDURE MAY RESULT IN THE UNINTENDED DEPLOYMENT OF AIR BAGS OR ACTIVATION OF THE ANTI-THEFT SYSTEM RESULTING IN DAMAGE TO THE VEHICLE AND PERSONAL INJURY.

•Disconnect the cable from the negative battery terminal (see warning and caution below).

•Remove Mounting Collar q from the main unit temporarily, which are already mounted at shipment.*

Caution

Various settings that have been stored in the memory in other on-board equipment (vehicle navigation etc.) may be lost if the battery terminals are disconnected.

Therefore, we recommend to make a record of or to back up the settings before disconnecting the terminals.

After completing installation of the main unit, set the equipment again according to the record.

•Unit should be installed in a horizontal position with the front end up at a convenient angle, but not more than 30˚.

❐Dashboard Installation

Installation Opening

This unit can be installed in any dashboard having an opening as shown below. The dashboard should be 4.75mm {3/16”} – 5.56 mm {7/32”} thick in order to be able to support the unit.

44

❐Installation Hardware

No.

Item

Diagram Q’ty

q Mounting Collar*

1

w Plain washer (5mmø)

2

e Spring Washer (5mmø)

2

r Hex. Nut (5mmø)

2

t Rear Support Strap

1

y

Hex. Bolt

1

(5mmø ⋅ 25 mm)

u

Toothed Lock Washer

1

 

(5mmø)

 

i

Removal Tool

2

 

(U-shaped)

 

o Antenna Connector

1

(a) Using the rear support strap t

 

(b) Using the rubber cushion (option)

Rear support bracket

Rubber cushion (option) (provided on the vehicle)

Mounting bolt (5 mmø)

q Mounting collar

CQ-5302U

Page 43 Page 45
Image 44
Page 43 Page 45
Contents CQ-5302U Observe the following warnings when installation Safety InformationObserve the following warnings when handling this unit Observe the following cautions when handling this unit Observe the following cautions when installationFollowing applies only in the U.S.A FCC WarningCustomer services Directory Accessory PurchasesService in Puer to Rico Npcparts @panasonic.comLimited Warranty Panasonic Consumer Electronics CompanyAbout XM Sirius Satellite Broadcast serviceConnectable Devices Contents Power and Sound Controls PowerVolume MuteSQ Sound Quality Audio Modes Clock Adjustment Time ReadjustmentSelecting the Clock Display Initial TimeRadio Mode Manual TuningSeek Tuning RadioRadio Preset Station Setting Auto Preset Memory APMManual Preset Memory Preset Station CallingTuning in a Weather Band Station Weather Band StationsSource CD/MP3 PlayerDisc slot Operation Flow Disc Player CD-DA discDisc Player MP3 disc Press Band yPlayer Source Display Disc Player Disc Player MP3 disc CD-DA discCD Text Display ID3 Tag ON/OFFRandom, Repeat, Scan Press 6 RandomRepeat Press 5 RepeatCD Changer Control Scan Play Tracks Discs Repeat Play Random Play XM Control Getting StartedCheck of XM Satellite Radio ID Activate the XM Satellite RadioXM Mode Channel SelectionManual Preset Memory Error display What is Sirius Satellite Radio? Sirius ControlRely on Sirius rocket science for superior Coverage Check of Sirius Satellite Radio IDSirius Mode Manual Preset Memory SR ID Confirmation System Control Mode Push the knob SEL for more than 2 secondsError display SR ID ConfirmationPress button 1 to 6 to enter a new 4-digit pass code number Enter the new 4-digit pass code number againError display Troubleshooting CommonRadio XM Receiver Sound SettingMP3 Sirius Satellite Radio Error Display Messages CD/MP3 CD changerMaintenance Cleaning this UnitSupported file systems Compression formats¡ Mpeg 1 audio layer 3 Bit rate 32 k-320 kbps VBR Yes ¡ Mpeg 2 audio layer 3 Bit rate 8 k-160 kbps VBR Yes¡ MP3 ID3 tag ¡ MP3Chassis Speaker ConnectionsProduct Servicing Please refer to the Warning statement above Installation GuideOverview Installation Dashboard InstallationInstallation Hardware Using the rear support strap tBattery terminal Insert Mounting Collar q intoMounting springs C ExampleTo Remove the Unit from the vehicles dashboard Wiring Diagram Electrical ConnectionsExample combination CQ-5302U RearXM ANT XM/SIRIUS control connector 10P connector Specifications

CQ-5302U specifications

The Panasonic CQ-5302U is a versatile and reliable car audio receiver designed to deliver an exceptional sound experience while incorporating modern technology features. As a part of Panasonic's commitment to providing high-quality audio equipment, this model stands out in the competitive automotive audio market.

One of the defining features of the CQ-5302U is its compatibility with multiple audio formats. It supports not only CD playback but also offers options for MP3 and WMA formats. This flexibility allows users to enjoy their favorite music in various formats, making it perfect for those who value a diverse music library. The unit's digital AM/FM tuner ensures that listeners can access a wide range of radio stations, enhancing the overall entertainment experience on the road.

The CQ-5302U is equipped with an easy-to-read LCD display, providing clarity and functionality. The intuitive controls are designed for user convenience, allowing drivers to operate the device effortlessly while on the move. The rotary knob and well-placed buttons enable seamless navigation through tracks and settings, ensuring that drivers can focus on the road ahead.

Powering the CQ-5302U is a robust built-in amplifier that delivers clear and powerful sound. With its 200 watts maximum power output, the receiver can drive speakers efficiently, creating a rich audio environment that enhances any journey. Additionally, it features a built-in equalizer, giving users the ability to tailor the sound to their preferences for a personalized listening experience.

Connectivity is another strong point of the CQ-5302U. The receiver includes an auxiliary input, allowing users to connect external devices, such as smartphones or portable media players, directly to the unit. This feature promotes versatility and accessibility, making it easy to play music from various sources without hassle.

In terms of design, the Panasonic CQ-5302U boasts a sleek and modern look that seamlessly integrates into most vehicle interiors. Its robust build quality ensures durability, while the straightforward layout appeals to users seeking simplicity without sacrificing performance.

Overall, the Panasonic CQ-5302U is an excellent choice for anyone looking to upgrade their vehicle's audio system. With its combination of format compatibility, powerful sound output, user-friendly interface, and modern design, this receiver addresses the needs of music enthusiasts and casual listeners alike. This model exemplifies Panasonic's dedication to providing high-quality audio solutions for a superior in-car listening experience.
Top Page Image Contents