d |
l |
FEW k 4500U
or
l
FEW k 4500U
TPS Operation (Tape Program Search)
Press [3 TPS] to activate the tape program search mode.
To select a desired program, press [i] or [j] corresponding times to go backward (up to 8) or forward (up to 9).
| (Rewind:) |
| (Fast forward:) | |||
8 | 0 | 1 | 9 | |||
| c | c |
|
| ||
|
|
| ||||
|
|
|
|
|
|
|
Ex1. To select the current program again, press [3 TPS], and press [i].
Ex2. To select the previous program, press [3 TPS], and press [i] twice.
Ex3. To select the next program, press [3 TPS] and press [j].
Ex4. To select the 3rd next program , press [3 TPS], and press [j] three times.
Press [3 TPS] again to cancel.
Notes: The TPS mode may not work correctly in the following cases. This, however, does not mean that the unit is defective.
There is an interval of less than 4 seconds or having a high level of noise or hum between programs.
There is particularly
Notes:
To maintain your cassette player in top condition, avoid using tapes that are longer than 90 minutes
If you insert into the unit a cassette with a loose tape caused by forcing it into cassette with a finger or the like, the cassette may not be properly reproduced. In such a case, eject the cassette, make the tape tight, then insert it back into the deck.
11