Panasonic CQ-4300U, CQ-4500U Fader, Tone Enhancement Loudness, Mute, Selecting Auxiliary Source

Press and hold

l

FEW k 4500U

Press and hold

l

FEW k 4300U

Fader

Press the knob to select the FADER mode and then turn it clockwise or counterclockwise to shift the sound volume to the front or rear speakers.

Note: In the audio mode (BASS/TRE/BAL/FADE), the display will returm to regular operation mode when there is no input for more than 5 seconds (2 seconds in the VOL mode).

S•HDB (Super High Definition Bass)

(Only for CQ-4500U)

This featare enhances bass definition.

Press and hold [MUTE] (S•HDB) for more than 2 seconds to activate high-defintion bass.

Press and hold [MUTE] (S•HDB) for more than 2 seconds to cancel.

Tone Enhancement (Loudness)

(Only for CQ-4300U)

Press and hold [MUTE] (LOUD) for more than 2 seconds to enhance bass and treble tones when listening at low or medium volume.

Press and hold [MUTE] (LOUD) for more than 2 seconds again to deactivate when listening at higher volumes.

Mute

Press [MUTE] to mute the sound completely.

Press [MUTE] again to cancel.

Selecting Auxiliary Source

(Only for CQ-4500U)

Press and hold [MODE] (AUX) for more than 2 seconds to select AUX Input mode.

Connect the auxiliary equipment (any other appropriate equipment) to the AUX IN Connector.

Canceling AUX Input mode

Press [MODE] (AUX) to resume the previous mode.