Panasonic CQ-DFX572U operating instructions Installation Guide

Page 23

E N G L I S

Installation Guide

E N G L I S

H

37

WARNING

This installation information is designed for experienced installers and is not in- tended for non-technical individuals. It does not contain warnings or cautions of po- tential dangers involved in attempting to install this product.

Any attempt to install this product in a motor car by anyone other than qualified in- staller could cause damage to the electrical system and could result in serious per- sonal injury or death.

Identify All Leads

The first step in installation is to identify all the car wires you’ll use when hooking up your sound sys- tem.

As you identify each wire, we suggest that you label it using masking tape and a permanent marker. This will help avoid confusion when making con- nections later.

Note:

Do not connect the power connector to the stereo

unit until you have made all connections. If there

If your car is not wired for an audio unit:

Go to the fuse block and find the fuse port for the battery, usually marked BAT.

Speakers

Identify the car speaker leads. There are two leads for each speaker which are usually color coded.

A handy way to identify the speaker leads and the speaker they are connected with is to test the leads using a 1.5 V AA battery as follows.

Hold one lead against one pole of the battery and stroke the other lead across the other pole. You will hear a scraping sound in one of the speakers if you

H

38

Installation Hardware

No.

Item

Diagram Q’ty

1

Mounting collar

1

2

Hex. nut (5 mm·)

1

3

Rear support strap

1

4

Tapping screw

1

 

(5 mm·a16 mm)

 

5

Mounting bolt (5 mm·)

1

6

Power connector

1

7

Removable face plate

1

 

case

 

8

Trim plate

1

9

Lock cancel plate

2

Install the unit in the dashboard.

Check the operation of the unit.

If you encounter problems, please consult your nearest professional installer.

Caution:

This unit operates with a 12 V DC negative ground auto battery system only. Do not at- tempt to use it in any other system. Doing so could cause serious damage.

Before you begin installation, look for the items which are packed with your unit.

Warranty Card…Fill this out promptly.

Panasonic Servicenter List for Service Directory …Keep for future reference in case the product needs servicing.

Installation Hardware…Needed for in-dash in- stallation.

Required Tools

You’ll need a screwdriver, a 1.5 V AA battery, and the following:

12 V DC

Electrical

Side-cut

Test bulb

tape

pliers

are no plastic caps on the stereo hooking wires,

insulate all exposed leads with electrical tape until

you are ready to use them. Identify the leads in

the following order.

Power Lead

If your car has a radio or is pre-wired for one:

Cut the connector wires one at a time from the plug (leaving the leads as long as possible) so that you can work with individual leads.

Turn the ignition on to the accessory position, and ground one lead of the test bulb to the chassis.

Touch the other lead of the test bulb to each of the exposed wires from the cut radio connector plug. Touch one wire at a time until you find the outlet that causes the test bulb to light.

Now turn the ignition off and then on. If the bulb also turns off and on, that outlet is the car power lead.

If your car is not wired for an audio unit:

are holding a speaker lead.

If not, keep testing different lead combinations until you have located all the speaker leads. When you label them, include the speaker location for each.

Antenna Motor

If your car is equipped with an automatic power an- tenna, identify the car motor antenna lead by con- necting one bulb tester lead to the car battery lead and touching the remaining exposed wires from the cut radio connector plug one at a time. You will hear the antenna motor activate when you touch the correct wire.

Antenna

The antenna lead is a thick, black wire with a metal plug at the end.

Connect All Leads

Now that you have identified all the wires in the car, you are ready to begin connecting them to the stereo unit wires. The wiring diagram (page 58) shows the proper connections and color coding of the leads.

We strongly recommend that you test the unit be- fore making a final installation.

You can set the unit on the floor and make tempo-

52

Overview

This product should be installed by a professional. However, if you plan to install this product yourself, your first step is to decide where to install it. The instructions in these pages will guide you through the remaining steps:

(Please refer to the “WARNING” statement above.)

Identify and label the car wires.

Connect the car wires to the wires of the power connector.

Dashboard Specifications

Thickness Min. 316z (4.75 mm) Max. 732z (5.56 mm)

2332z (53 mm)

7532z (182 mm)

Go to the fuse block and find the fuse port for radio (RADIO), accessory (ACC), or ignition (IGN).

Battery Lead

If your stereo unit has a yellow lead, you will need to locate the car’s battery lead. Otherwise you may ignore this procedure. (The yellow battery lead pro- vides continuous power to maintain a clock, memo- ry storage, or other function.)

If your car has a radio or is pre-wired for one:

With the ignition and headlights off, identify the car battery lead by grounding one lead of the test bulb to the chassis and checking the remaining exposed wires from the cut radio connector plug.

rary connections to test the unit. Use electrical tape to cover all exposed wires.

Important:

Connect the red power lead last, after you have made and insulated all other connections.

Ground

Connect the black ground lead of the power con- nector to the metal car chassis.

53

CQ-DFX572U

CQ-DFX572U

Image 23
Contents CQ-DFX572U §For Canada Safety InformationApplies only in U.S.A FCC WarningUse this Product Safely FeaturesLanguage for Manuals of Products Using LCD ≥CD player/receiver ≥Power connector ≥Remote control unitMP3 ContentsBattery Notes Remote Control Unit Preparation GeneralPower Battery InstallationClock Basics Calling TuningPreset Station BandCD Player Menu2 Submenu Setting Menu Setting on CD Player ModeMenu Submenu Setting Folder Selection Order/MP3 File Playback Order Example MP3 player mode displayMP3 Player Direct MP3 Folder Selection Listening to a MP3 Data MP3 Player ModeMP3 Folder Selection MP3 File Selection MP3 In-File SearchMenu Track Selection Track Search CD Changer ModeCD Changer Control Disc SelectionDisc Repeat Play Menu Setting on CD Changer ModeMenu Submenu Disc Random PlayBalance and Fader Audio Settings Audio·HDB Super High Definition Bass Bass and TrebleContrast Picture Display Settings PictureDisplay Setting Spectrum Analyzer S·A Display PatternSecurity Function Function Settings FunctionMute/Attenuation Supported File Systems and File Names Maximum Number of Files/FoldersConverting encoding audio data to an MP3 file Recording MP3 files on CD-R/RWIf You Suspect Something Wrong TroubleshootingTroubleshooting Tips Preliminary StepsMP3 CD/MP3 Error Display MessagesSound Setting Remote Control UnitReplacing the Fuse Troubleshooting MaintenanceMaintenance Product ServicingInstallation Guide Preparation Final InstallationPlace the Removable Face Plate into Case Install Removable Face PlateSecurity Indicator Panel Removal AlarmElectrical Connections Wiring DiagramFM Stereo Radio Electrical Connections SpecificationsUpgrading the System GeneralMatsushita Electric Puerto Rico, Inc. PSC

CQ-DFX572U specifications

The Panasonic CQ-DFX572U is a highly regarded digital media receiver known for its versatility and exceptional audio performance. Initially gaining attention for its appealing design, this unit is packed with a wealth of features that cater to the needs of modern music enthusiasts.

One of the standout features of the CQ-DFX572U is its compatibility with a variety of audio formats. It supports CD, CD-R, and CD-RW playback, which means users can enjoy their favorite albums and homemade mixes. Additionally, it offers MP3 and WMA playback, allowing users to experience high-quality audio from digital files stored on CDs. This versatility ensures that users can access a wide range of music while on the road.

Another significant highlight of the CQ-DFX572U is its user-friendly interface. The unit features an easy-to-read LCD display that provides clear information about track numbers, playback modes, and more. With intuitive controls, including a simplified knob for volume adjustment, users can navigate their music library without distractions.

In terms of connectivity, the CQ-DFX572U is equipped with an auxiliary input, making it easy for users to connect external devices like smartphones, MP3 players, or tablets. This feature enhances the overall listening experience, as it allows for a broader selection of music sources. Additionally, the unit is compatible with various optional adapters, enabling Bluetooth connectivity, which adds another layer of convenience for those looking to stream audio wirelessly.

The audio performance of the CQ-DFX572U is commendable, with its built-in amplifier delivering clear and powerful sound. The unit includes various audio settings, such as bass boost and equalizer presets, allowing users to customize their listening experience. This level of audio customization ensures that every listener can tailor their sound to their preferred style.

Durability and design are also key characteristics of the CQ-DFX572U. Constructed with high-quality materials, this receiver is designed to withstand the rigors of everyday use while maintaining an attractive aesthetic that complements the interior of most vehicles.

In summary, the Panasonic CQ-DFX572U stands out as a feature-rich digital media receiver that checks all the boxes for functionality, versatility, and audio quality. With support for various playback formats, user-friendly design, and customizable sound settings, it remains a popular choice among music lovers seeking an engaging driving experience.