E N G L I S
Electrical Connections (Continued) | Specifications |
E N G L I S
H
45
❐Upgrading the System
Example Combination
≥CD changer
≥Stereo power amplifier
Note:
≥For wiring, carefully read the operating instructions for the devices connected.
Ground lead
CD changer
Extension cord (included for
R (Red)
L (White)
❐ General
Power supply: | 12 V DC (11 Vj16 V), test voltage 14.4 V, negative ground |
Current consumption: | Less than 2.2 A (CD play mode; 0.5 Wa4 channels) |
Maximum power output: | 50 Wa4 channels at 1 kHz, volume control maximum |
Tone adjustment range: |
|
Bass: | n12 dB at 100 Hz |
Treble: | n12 dB at 10 kHz |
Suitable speaker impedance: | 4j8 ≠ |
Preamp output voltage: | 2.5 V (CD play mode; 1 kHz, 0 dB) |
Subwoofer output voltage: | 2.5 V |
200 ≠ | |
Subwoofer output impedance: 200 ≠ | |
Dimensions (WaHaD): | 7za115/16 za57/8 z (178a50a150 mm) |
Weight: | 3 lbs. 8 oz (1.6 kg) |
❐ FM Stereo Radio
Frequency range: | 87.9 MHzj107.9 MHz |
Usable sensitivity: | 11.0 dBf. (1.25 ¨V, 75 ≠) |
50 dB quieting sensitivity: | 15.2 dBf. (1.6 ¨V, 75 ≠) |
Frequency response: | 30 Hzj15 kHz (n3 dB) |
Alternate channel selectivity: | 75 dB |
Stereo separation: | 35 dB (1 kHz) |
Image response ratio: | 75 dB |
IF response ratio: | 100 dB |
Signal/noise ratio: | 70 dB |
❐ AM Radio
Frequency range: | 530 kHzj1 710 kHz |
Usable sensitivity: | 29 dB/¨V (25 ¨V, S/N 20 dB) |
H
46
L | R |
(White) | (Red) |
CD changer control connector | Battery lead |
BATTERY | |
Fuse (3 A) | |
| DIN cord |
❐ CD Player
Sampling frequency: | 8 times oversampling |
DA converter: | MASH·1 bit/4 DAC system |
Error correction system: | Panasonic super decoding algorithm |
Astigma | |
Light source: | Semiconductor laser |
Wave length: | 780 nm |
Frequency response: | 20 Hzj20 kHz (n1 dB) |
Signal/noise ratio: | 96 dB |
6 Power connector
Stereo power amplifier
Subwoofer speakers
Total harmonic distortion: | 0.01 % (1 kHz) |
| |
Wow and flutter: | Below measurable limits |
| |
Channel separation: | 75 dB |
|
|
MP3 decoding: | MPEG 1 Audio Layer 3/MPEG 2 Audio Layer 3 | ||
Bit rate: | (MPEG 1 Audio Layer 3) | 32 kbpsj256 kbps, VBR (Variable Bit Rate) | |
| (MPEG 2 | Audio Layer 3) | 16 kbpsj160 kbps, VBR (Variable Bit Rate) |
Sampling frequency: | (MPEG 1 | Audio Layer 3) | 32 kHz, 44.1 kHz, 48 kHz |
| (MPEG 2 | Audio Layer 3) | 22.05 kHz, 24 kHz |
Above specifications comply with EIA standards.
Note:
≥Specifications and the design are subject to modification without notice due to improvements in technology.
60 |
| 61 | ||
|
|
| ||
|
|
|
|
|