Radio Source Display
lights while receiving an FM stereo signal. | Display change | |||||
| Band | Frequency Preset Number | ||||
| Press [DISP] to change the display. | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Radio mode display (Default)
Clock display
Station Preset
Up to 6 stations can be preset in AM, FM1, FM2, and FM3 respectively.
Preset stations can be simply called up by pressing [1] to [6].
Auto Preset Memory (APM)
With this operation, stations with good receiving conditions can be automatically stored in the preset memory.
1 Select a band.
2 Hold down [BAND] (APM) for more than 2 seconds.
The preset stations under best receiving conditions are received for 5 seconds each after presetting the stations (SCAN). To stop scanning, press one of the buttons from [1] to [6].
Note: New stations overwrite existing saved stations.
Manual station preset
1 Tune into a station.
2 Hold down one of the preset buttons from
[1]to [6] for more than 2 seconds.
(blinks once)
Note: New stations overwrite existing saved stations.