Kenwood CT/KXF-W Tape dubbing operation Deck a \Deck B, To pause dubbing, To stop dubbing

Page 20

Tape dubbing operation (Deck A \Deck B)

CT-2050/203/KXF-W6010/W4010 (En/M)

The dubbing refers to the copy of the recorded contents of a tape to another tape (tape in Deck A \ tape in Deck B).

20 Since this unit is not designed for recording with metal (TYPE ) tapes, do not use metal tapes for recording.

Preparation 1Load the tape to be played in deck A and the tape to be recorded in deck B. 0

2Set the tape transport directions of decks A and B to the same direction ( by pressing the play (2 or 3) key then pressing the stop (7) key immediately after it ).

3Make "Playback (recording) preparation".

CT-203/KXF-W4010 only

CT-2050/KXF-W6010 only

: Keys and control used in the operations described on this page.

Tape dubbing

1Perform auto-bias adjustment. (The bias adjustment is applied to deck B.)

“AUTO BIAS”blinks. After approximately “AUTO BIAS” lightsup. 40 seconds

AUTO BIAS

ÖThe optimum bias is set in about 40 seconds, after which the deck enters the stop mode.

ÖRecording is possible even if the auto-bias adjustment operation is omitted.

For normal-speed dubbing.

NORM.DUBB

CT-2050/KXF-W6010

NORMAL

DUBBING

CT-203/KXF-W4010

For high-speed dubbing.

Normal dubbing:

Dubbing at the normal

 

HIGH DUBB.

speed.

 

 

"DUBBING NORMAL" lights up.

CT-2050/KXF-W6010

 

HIGH

 

DUBBING

 

CT-203/KXF-W4010

 

High-speed dubbing: Dubbing at about twice the normal speed.

"DUBBING HIGH" lights up.

To pause dubbing

For normal-speed dubbing.

NORM.DUBB

CT-2050/KXF-W6010

NORMAL

DUBBING

CT-203/KXF-W4010

For high-speed dubbing.

HIGH DUBB.

CT-2050/KXF-W6010

HIGH

DUBBING

CT-203/KXF-W4010

ÖOnly deck B enters the record- pause mode after leaving a non- recorded space of about 4 seconds in case of normal-speed dubbing, or about 6 seconds in case of high-speed dubbing.

ÖTo resume dubbing after pause, press the same DUBBING key as above (NORMAL DUBBING or HIGH DUBBING) again.

To stop dubbing

Press the stop (7) key of Deck B.

2 7 3

ÖBoth decks A and B enter the stop mode.

1.The recording balance and recording level cannot be adjusted for dubbing.

2.The DOLBY NR is not active during dubbing.

The tape recorded by dubbing features the same NR system as the original tape in Deck A.

Notes 3. Noise from TV may interfere with dubbed sound if high-speed dubbing is executed near a TV set. To prevent this, install the system farther from the TV set.

4.If the original tape was recorded at a high level, the sound quality may be degraded, if high-speed dubbing is used. In such a case, use normal- speed dubbing.

Image 20
Contents CT/KXF-W Series Safety precautions IntroductionSpecial features ContentsImportant items Maintenance CleaningCleaning the head section ReferenceWhen there is slack in the tape Handling the cassette tapeImportant items To store cassette tapesSystem connections Except for U.S.A., CanadaRemote Control System connectionsAutomatic Operation except XR equipment Synchronized Recording except XR equipmentControls and indicators CT-2050/KXF-W6010Controls and indicators Tape transport direction indicators Preparation for playback recordingPlayback recording preparation Before playback recordingNormal playback Relay playback To Stop relay playbackLoad cassette tapes in both decks 2Determine the playback conditionCT-2050/203/KXF-W6010/W4010 En/M To play a tune located 4 tunes beyond Convenient music search DpssSkip play operation Determine the playback mode conditions Rewind & Play operationSingle-tune repeated playback operation Dash & Play operationHow to record CT-203/KXF-W4010 Deck B only Normal recordingSelect the source to be recorded Set the recording levelBias level adjustment Deck B of the CT-2050/KXF-W6010 only How to use the MPX Filter keyHow to record CT-203/KXF-W4010 Deck B only Start recordingTo start recording again from the biginning To pause recording temporarily PauseTo stop recording To cancel relay recording Set the relay recording modeAdjust the recording level Relay recording CT-2050/KXF-W6010 onlyTape dubbing operation Deck a \Deck B Tape dubbingTo pause dubbing To stop dubbing4Start playing the CD Set the record-pause modeCD synchro recording How to cancel Ccrs Recording of CD playback Ccrs Deck B onlyInsert a tape in deck B Determine the recording condition Press the Ccrs keySet the timer Timer operationsTimer playback of tape Timer operations Timer relay recording CT-2050/KXF-W6010 only5Set the timer Case of difficulty Operation to resetSymptom Cause Remedy Case of difficulty Glossary Dolby noise reduction systemRecording with Dolby HX Pro Auto-bias functionFor your records Specifications28 CT-2050/KXF-W6010

CT/KXF-W specifications

The Kenwood CT/KXF-W series is a testament to Kenwood's commitment to delivering high-quality car audio systems that enhance in-vehicle entertainment. This series incorporates a range of innovative technologies and features designed to provide an immersive listening experience for audiophiles and casual listeners alike.

One of the standout features of the Kenwood CT/KXF-W models is their advanced digital signal processing technology. This technology allows users to customize their sound settings to achieve the perfect audio balance, adjusting parameters such as equalization, time alignment, and bass management. The result is a tailored audio experience that meets individual preferences, regardless of the type of music being played.

Connectivity is a critical component of modern car audio systems, and the CT/KXF-W series excels in this area. With Bluetooth capability, users can easily connect their smartphones and other devices wirelessly, enabling hands-free calling and music streaming. The series also supports USB playback, allowing users to access their music libraries directly from a flash drive or compatible device.

Another notable characteristic of the Kenwood CT/KXF-W series is its user-friendly interface. The clear, bright display and intuitive controls ensure that even those who are not tech-savvy can navigate the system with ease. The models boast customizable background colors, which allows users to personalize the look of their audio system to match their vehicle's interior.

In terms of sound quality, the CT/KXF-W series stands out with its high-power output amplifiers, which are capable of delivering rich, dynamic sound with minimal distortion. This is complemented by compatibility with high-resolution audio formats, allowing users to enjoy their music in the best possible quality.

Durability and reliability are also key characteristics of the Kenwood CT/KXF-W series. Designed with high-quality components, these systems are built to withstand the rigors of daily use while maintaining top performance. Kenwood's reputation for excellence is evident, as they have incorporated features that protect the system from overheating and electrical interference.

Additionally, the series supports multiple audio sources, including AM/FM radio, CD players, and streaming services, making it a versatile choice for any music lover. With the blend of innovative technology, user-friendly design, and high-quality sound, the Kenwood CT/KXF-W series is undoubtedly a leading choice for upgrading in-car audio systems. Whether embarking on a long road trip or simply running errands, this series transforms any journey into a premium audio experience.