Philips SDV6224/12 user manual Set up a digital tuner with this antenna

Page 8

Set up a digital tuner with this antenna

You can install available channels with the digital TV tuner.This automatic process is part of the setup of the tuner. Ensure the antenna has

set up properly before the tuner can receive viewable channels.

There are two ways to connect the antenna to the TV:

Connect the antenna to a digital tuner. If the signal strength is good enough, the channels can be memorized in the tuner automatically .

Connect the antenna directly to the TV.

Tune to the analogue channels and find the best antenna location. Then re- connect the antenna to the digital tuner. Ensure the signal strength is good enough before you install the channels with the tuner.

8EN

Image 8
Contents Register your product and get support at Page Contents Safety Recycling Overview Installation Get startedFor VHF/FM reception For UHF receptionMount on the wall Turn the TV to the desired channel/ stationSet up a digital tuner with this antenna Warranty and service Can this antenna work with Analogue transmissions?Glossary AmplifierUHF Ultra high frequency VHF Very high frequencyPage Koninklijke Philips Electronics N.V