Jensen Tools JHD3510 Controlling Playback, Accessing iPod Mode, Turning the iPod On/Off

This unit is equipped with an iPod ready function that will allow you to control your iPod (if compatible) using the control panel control buttons. The following iPod versions are supported:

•iPod 3G (firmware version 2.2 only)

•iPod Mini

•iPod 4G

•iPod Photo

•iPod Nano

•iPod 5G (Video)

Controlling Playback

Pausing Playback

During playback, press the 1/> button (8) to pause the iPod player. “Pause” will appear on the LCD. Press 1/> again to resume playback.

Repeat Play

During playback, press the 3/RPT button (5) to repeat the current song. “Repeat” will appear on the LCD. Press 3/RPT again to stop repeat playback.

Random Play

NOTE: iPod and iPod Cable sold separately.

Accessing iPod Mode

The unit will automatically switch to iPod mode when an iPod is plugged into the iPod cable.

To return to the iPod menu from any other source, press the MODE button (4) on the control panel or remote control until “iPod” appears on the display.

Turning the iPod On/Off

The iPod power turns on automatically when an iPod is connected to 30-pin iPod cable, as long as

the vehicle ignition is turned on. You can turn the iPod off by disconnecting it from the cable or by turning the ignition off. When the ignition is turned

off, the iPod will pause and then enter sleep mode after 2 minutes. While the iPod is connected, the power cannot be turned on or off from the iPod itself.

During playback, press the 4/RDM button (7) to play all songs in the current category in random order. Random play will begin once the current song has finished playing. “RANDOM” will appear on the LCD. Press 4/RDM again to stop random playback.

Selecting Tracks

During playback, press the TUNE/TRK << / >> button (20/21) to play the previous or next track in the current category. Press the TUNE/TRK << button (20) once to play the song from the start position or press TUNE/TRK << twice to play the previous track.

Press and hold the TUNE/TRK << / >> button (20/21) to fast reverse/forward the song.

NOTE: If you press and hold the TUNE/TRK << / >> button to change the current song to the previous/next song, you will exit fast reverse/forward mode.

Playlist Selection

Press the S-MODbutton (2) to access Playlist selection mode. While is Playlist mode, repeatedly press the S-MODbutton to choose song search by Artist, Album Genre, or Song Title. After choosing a search category, use the 5/DN (9) and 6/UP (10) buttons to search the available files on the iPod. Press the 1/> button (8) to play the selected file.

NOTE: The iPod will continuously recharge when connected to the unit, as long as the vehicle ignition is turned on.

Alternate Display Mode

Press the INFO/SCROLL button (12) to change the display information between single and double line text display.