Tuner Operation

JHD3510

Automatically Store / Preset Scan (AS/PS)

Select a Band

		Automatically Store
		Select an AM or FM band. Press and hold the AS/PS (15) button for more than 2 seconds to
		automatically select six strong stations and store them in the current band. The new stations
		replace any stations already stored in that band.
		Preset Scan
	19	Select a band. Press AS/PS (15) to scan stations stored in the current band. The unit will
	14	pause for 5 seconds at each preset station. Press AS/PS again to stop scanning when the
	14	desired station is reached.
		desired station is reached.

17 RDBS Operation

This unit is equipped to display RBDS (Radio Broadcast Data Service) information when broadcast by the radio station. The following LCD indicators appear when data is received:

• RBDS: The current radio station is broadcasting RBDS data.

• TA: Traffic Alert mode is activated. When flashing, a Traffic Alert message is in progress.

• PTY: Program Type data is being received. When flashing, PTY search is in progress.

Press the BAND button (15) to change between three FM bands and two AM (MW) bands. Press and hold the BAND button to access the Weatherband (WB).

NOTE: Radio stations broadcasting RBDS may not be available in your listening area.

Manual Tuning

Press the TUNE/TRK >> or << buttons (19, 18) to seek stations up/down step by step.

Auto Seek Tuning

Press and hold the TUNE/TRK >> or << buttons (19, 18) to automatically seek the next or previous strong station.

NOTE: Seek tuning is not available for weather band channels. Use the up or down tuning buttons to manually select any of the seven available weather band channels.

Preset Stations

Six numbered preset buttons store and recall stations for each band.

Store a Station

Select a band (if needed), then select a station. Press and hold a preset button (5-10) for two seconds. The preset number will appear on the LCD.

Recall a Station

Select a band (if needed). Press a preset button (5-10) to select the corresponding stored station.

NOTE: Preset buttons are pre-assigned frequencies in weather band mode.

Traffic Alert (TA)

Press and hold the PTY/TA button (13) to activate Traffic Alert mode and search for a Traffic Alert in your area.

•Radio Mode: If no TA information is being broadcast, the radio will display “NOT FOUND” and return to the previously tuned station.

•All other Modes: If a Traffic Alert is being broadcast, playback of the current mode will be interrupted and the radio will switch to the FM station issuing the TA. Press and hold the PTY/TA button again to exit TA mode.

Program Type (PTY)

In FM radio mode, press the PTY/TA button (13) to list the following search options: ANY / News / Information / Sports / Talk / Rock / Classic Rock / Adult Hits / Soft Rock / Top 40 / Country / Oldies / Soft / Nostalgia / Jazz / Classical / Rhythm and Blues / Soft R&B / Language / Religious Music / Religious Talk / Personality / Public / College / Weather / Emergency Test / Emergency.

To search for stations in a PTY category:

1.Press the PTY/TA button (13) to view the current PTY category.

2.Use the rotary encoder knob (1) to move through the list of available categories and select the program type you wish to search.

3.After selecting the desired PTY, press and hold the TUNE/TRK >> or << button (19, 18) to search the band for broadcasts of this type.

NOTE: Performing a PTY search on “ANY” will Seek Tune and stop on any station broadcasting RBDS, regardless of the program type.