Jensen Tools owner manual MCD5050 Troubleshooting, Specifications

Page 13

MCD5050

Troubleshooting

Problem

Cause

Corrective Action

No power.

Vehicle ignition switch is not

If the power supply is connected to

 

on.

the vehicle accessory circuits but

 

 

the engine is not moving, switch the

 

 

ignition key to “ACC”.

 

 

 

 

The fuse is blown.

Replace the fuse.

Disc cannot be loaded

There is a disc already inside

Remove the current disc and insert

or ejected.

the unit.

the new one.

 

 

 

 

Inserting disc in wrong

Insert disc with label facing up.

 

direction.

 

 

 

 

 

Disc is defective or dirty.

Clean disc or try playing another

 

 

one.

 

 

 

 

Excessive temperature.

Cool vehicle to a normal

 

 

temperature.

 

 

 

 

Condensation has collected.

Turn off for an hour, then try again.

No sound.

Volume turned down too low.

Adjust volume until sound is heard.

 

Wiring not connected properly.

Check wiring connections.

Sound skips or sound

Installation angle exceeds 30

Adjust the installation angle to less

quality is poor.

degrees.

than 30 degrees.

 

 

 

 

Disc is defective or dirty.

Clean disc or try playing another

 

 

one.

 

 

 

Operation keys do not

Microcomputer is not operating

Press RESET.

work.

properly due to noise.

 

 

 

 

Radio does not work

Antenna cable not connected.

Insert antenna cable firmly.

Automatic station

Radio signals are too weak.

Select a station manually.

selection does not work.

 

 

 

 

 

Specifications

General

Power Supply Requirements . . . . . . . . . . . . . . . . . . . . . . . . . DC 12 Volts, Negative Ground Chassis Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178 (W) x 160 (D) x 50 (H) Tone Controls . . . . . . . . . . . . . . . . . . . Bass (at 100 Hz), ±10 dB; Treble (at 10 kHz), ±10 dB Maximum Output Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4x40W Current Drain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Ampere (max.)

CD Player

Signal to Noise Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . More than 65 dB Channel Separation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . More than 45 dB Frequency Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40Hz – 18 kHz

FM Tuner

Tuning range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87.5-108.0 Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4uV Stereo separation @ 1 kHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . >25dB

AM Tuner

Tuning range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .522-1710 Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4uV Stereo separation @ 1 kHz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . >25dB

Specifications subject to change without notice.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Thank You System FeaturesASA Electronics Corporation 110705 Funciones del Sistema MCD5050Merci Fonctions du systèmePreparación MCD5050 PreparationPréparation MCD5050 Instalación InstallationCableado MCD5050 WiringCâblage MCD5050 Operación Básica Basic OperationOpération de base Operación Básica continuado MCD5050 Basic OperationOpération de base continué MCD5050 Opération de base continué Operación de la radio MCD5050 Radio OperationFonctionnement de la radio Fonctionnement de la radio continué MCD5050 Operación de la radio continuadoMCD5050 CD Player Operation Operación del Cambiador de CD CD Changer OperationFonctionnement de changeur de CD Specifications MCD5050 TroubleshootingEspecificationes Corrección de ProblemasCaractéristiques MCD5050 Dépannage

MCD5050 specifications

The Jensen Tools MCD5050 is a versatile and robust tool designed to meet the demanding needs of professionals in various industries, including telecommunications, data communications, and network installation. This innovative piece of equipment stands out for its exceptional functionality and user-friendly design, making it an essential addition to any technician’s toolkit.

One of the main features of the MCD5050 is its integrated test capabilities. The device is equipped with advanced testing technologies that enable users to perform extensive cable tests, ensuring optimal performance and compliance with industry standards. The MCD5050 simplifies the process of troubleshooting and diagnosing network connections, helping technicians quickly identify and resolve issues related to cable performance.

The MCD5050 boasts a user-friendly interface with a clear and intuitive display. This feature allows users to navigate through various menus and options seamlessly, reducing the learning curve associated with using advanced testing equipment. Its lightweight, ergonomic design ensures comfort during prolonged usage, making it particularly suitable for fieldwork.

In addition to its testing functions, the Jensen Tools MCD5050 includes a range of valuable features tailored for cable installation projects. It supports various cable types, including coax, twisted pair, and fiber optic cables, allowing for a wide range of applications. The tool also supports multiple testing modes, including continuity testing, distance to fault, and signal strength assessment. This versatility not only enhances productivity but also enables technicians to handle diverse projects with ease.

The MCD5050 incorporates cutting-edge technology that provides accurate measurements and reliable performance. Its advanced signal processing algorithms ensure that test results are dependable, enabling technicians to make informed decisions quickly. This reliability is critical in high-stakes environments where downtime can be costly and detrimental.

Durability is another significant characteristic of the Jensen Tools MCD5050. Constructed from high-quality materials, the tool is designed to withstand the rigors of daily use in challenging conditions. Its rugged casing protects against dust, moisture, and impacts, ensuring longevity and consistent performance over time.

In summary, the Jensen Tools MCD5050 is a comprehensive solution for professionals involved in network installation and maintenance. Its combination of advanced testing capabilities, user-friendly design, and durability makes it an invaluable tool for ensuring efficient and reliable network performance. Whether you are involved in troubleshooting or installation, the MCD5050 is engineered to enhance your efficiency and effectiveness in the field.
Top Page Image Contents