How to Assign Preset Stations and Custom Names
2.Select Station Preset Number 1, by rotating the PRE- SET Knob clockwise or counterclockwise.
3.Push the DISPLAY
Figure 7
Note: The number 1 is the assigned Preset Number followed by the first of eight possible characters of the new Assigned Preset Name.
4.Rotate the TUNING Knob clockwise to scroll through the alphabet until the character “J” appears. Refer to figure 8.
Figure 8
5.Rotate the PRESET Knob clockwise until the “A” ap- pears to the right of the “J”. Refer to figure 9.
Figure 9
6.Rotate the PRESET Knob clockwise again until the “A” appears to the right of the “JA”.
7.Rotate the TUNING Knob clockwise to scroll through the alphabet until the character “Z” appears. Refer to figure 10.
Figure 10
8.Rotate the PRESET Knob clockwise again until the “A” appears to the right of the “JAZ”.
9.Repeat step 7 and refer to figure 11.
Figure 11
10.Rotate the PRESET Knob clockwise again until the “A” appears to the right of the “JAZZ”.
11.Rotate the TUNING Knob clockwise to scroll through the alphabet until no character appears.
12.Rotate the PRESET Knob clockwise again until the “A” appears to the right of the “JAZZ ”.
13.Rotate the TUNING Knob clockwise to scroll through the alphabet and numbers until the “7” digit appears. Refer to figure 12.
Figure 12
14.Press and release the front panel ENTER
Note: If a Preset has been Custom Named, it is possible to restore the default Station Frequency Display if desired. Press the ENTER
15