McIntosh MR85 owner manual How to Connect

How to Connect

1.Connect a data cable from the TUNER 1 DATA IN jack to the TUNER DATA PORT of a McIntosh Control Center or Preamplifier.

Note: Remote Control operation of the Tuner is made possible with a Data Cable connected between the MR85 and a McIntosh Control Center or Preamplifier. If the MR85 Tuner is connected to a non-McIntosh Preamplifier, remote control operation is still possible with an appropriate interface and McIntosh Remote Control. Contact your McIntosh Dealer for additional details.

2.Connect a power control cable from the POWER CON- TROL IN jack to the POWER CONTROL OUT or ACC jack of a McIntosh Preamplifier, Control Center or other McIntosh component.

3.Connect an audio cable from the TUNER 1 FIXED OUTPUTS to the TUNER INPUTS of a preamplifier or control center.

Note: An optional connection would be to use the TUNER 1 VARIABLE OUTPUTS.

4.Connect the FM Antenna or Cable (from the Cable Company) to the MR85 Tuner 75Ω (Ohm) FM ANTenna connector.

5.Connect with the supplied cable, from the 5 Pin Socket of the McIntosh RAA1 Remote AM Antenna to the MR85 Tuner RAA1 AM ANTenna DIN Socket.

6.Plug the MR85 AC Power Cord into an AC Outlet.

McIntosh Control Center