Metra Electronics 99-7878B ISO Mount Radio Provision with Pocket, Figure C

Page 7

99-7878B KIT ASSEMBLY

ISO MOUNT RADIO PROVISION WITH POCKET

*Note: Refer also to the instructions included with the aftermarket radio.

1Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation.

2Mount the ISO Brackets to the head unit with the screws supplied with the unit. (Figure A)

3Snap the pocket into the bottom opening of the radio housing.

(Figure B)

4Slide the head unit into the radio opening until the side clips engage.

(Figure C)

5Snap the Trim plate into the Radio Housing. (Figure C)

6Reassemble dash in reverse order of disassembly.

A

B

C

5

Image 7
Contents Honda Insight Dash Disassembly Honda Insight 95-7878B Dash DisassemblyContinue to kit preparartion 99-7878B KIT Preparation KIT PreparationDIN Mount Radio Provision with Pocket 99-7878B KIT AssemblyFigure C ISO Mount Radio Provision with PocketDouble DIN/STACKED ISO Mount Units Radio Provision