NEC S521 user manual English-22

SCHEDULE RESET

PIP

Resets the following settings within the SCHEDULE menu back to factory setting:

OFF TIMER, SCHEDULE SETTINGS.

-

KEEP PIP MODE		Allows the monitor to remain in “PIP” and “TEXT TICKER” mode after powering off.	OFF
		When Power is returned, PIP and TEXT TICKER appear without having to enter the OSD.
PIP MODE		Picture-in-Picture	OFF
	OFF	OFF
	PIP	PIP
	POP	POP
	SIDE BY SIDE (ASPECT)	SIDE BY SIDE ASPECT
	SIDE BY SIDE (FULL)	SIDE BY SIDE FULL
PIP SIZE		Selects the size of the sub-picture used in Picture-in-Picture (PIP) mode.	LARGE
	SMALL
	MIDDLE
	LARGE
PIP POSITION		Determines where the PIP appears on the screen.	X = 95, Y = 92
ASPECT		Selects sub picture aspect, [FULL], [NORMAL], [WIDE] and [ZOOM]. See page 17.	FULL
TEXT TICKER			OFF
	MODE	Enables Text Ticker and allows you to set Horizontal or Vertical direction.
	POSITION	Selects the location of the Text Ticker on the screen.
	SIZE	Determines the size of the Text Ticker in relationship to the overall screen size.
	BLEND	Sets the transparency of the Text Ticker (0: transparent, 100: opaque).
	DETECT	Enables auto-detection of the Text Ticker.
	FADE IN	Enables fade-in of the text ticker.
SUB INPUT		Selects sub picture input signal.	Depend on signal input
PIP RESET		Resets PIP options back to factory settings except ASPECT and SUB INPUT.	-
OSD
LANGUAGE		Select the language used by the OSD.	ENGLISH
			(Depend on
	ENGLISH
			destination)
	DEUTSCH
	FRANÇAIS
	ITALIANO
	ESPAÑOL
	SVENSKA
	РУССКИЙ
OSD TURN OFF		Turns off the OSD after a period of inactivity. The preset choices are 10-240 seconds.	30 Sec.
OSD POSITION		Determines the location where the OSD appears on the screen.	X = 128, Y = 225
	UP
	DOWN
	LEFT
	RIGHT
INFORMATION OSD		Selects whether the information OSD is displayed or not. The information OSD will be	ON, 3 Sec.
		displayed when the input signal or source changes. The information OSD will also give a
		warning when there is no-signal or the signal is out-of range.
		An interval between 3 to 10 seconds for the Information OSD to appear is available.

English-22