NEC S521 user manual English-20

	Setting			Default
PICTURE
BRIGHTNESS		Adjusts the overall image and background brightness. Press + or - to adjust.		70
		Note: When AMBIENT1 or AMBIENT2 is selected in picture mode, this function cannot changed.
CONTRAST		Adjusts the image brightness in relationship to the background. Press + or - to adjust.		50
		Note: The sRGB picture mode is standard and cannot be changed.
SHARPNESS		Adjusts the crispness of the image. Press + or - to adjust.		50*2
BLACK LEVEL		Adjusts the image brightness in relationship to the background. Press + or - to adjust.		50
		Note: The sRGB picture mode is standard and cannot be changed.
TINT		Adjusts the tint of the screen. Press + or - to adjust.		50
		Note: The sRGB picture mode is standard and cannot be changed.
COLOR		Adjusts the color depth of the screen. Press + or - to adjust.		50*2
		Note: The sRGB picture mode is standard and cannot be changed.
COLOR TEMPERATURE		Adjusts the color temperature of the entire screen. A low color temperature will make the screen		10000K
		reddish. A high color temperature will make the screen bluish. If TEMPERATURE needs further
		adjustment, the individual R/G/B/ levels of the white point can be adjusted. To adjust the
		R/G/B levels, CUSTOM must be showing as the COLOR TEMP selection.
		Note: The sRGB picture mode is set to a predefined 6500 K standard and cannot be changed.
		When PROGRAMMABLE is selected in GAMMA SELECTION, this function cannot be changed.
COLOR CONTROL		Adjusts the levels of the Red, Yellow, Green, Cyan, Blue, Magenta and Saturation.		0
		Note: The sRGB picture mode is standard and cannot be changed.
GAMMA SELECTION		Select a display gamma for best picture quality.		NATIVE*2
		Note: The sRGB picture mode is standard and cannot be changed.		(except sRGB
				setting)
	NATIVE	Gamma correction is handled by the LCD panel.
	2.2	Typical display gamma for use with a PC.
	2.4	Good for video (TV, DVD, etc.)
	S GAMMA	Special gamma for certain types of movies. Raises the dark parts and lowers the light parts
		of the image (S-Curve).
	DICOM SIM.	DICOM GSDF curve simulated for LCD type.
	PROGRAMMABLE	A programmable gamma curve can be loaded using NEC optional software.
MOVIE SETTINGS
	NOISE REDUCTION	Adjusts the amount of noise reduction. Press + or - to adjust.		6*2
	TV, VIDEO1, VIDEO2, S-VIDEO inputs only
	FILM MODE	Automatically senses the sources frame rate for optimal picture quality.		AUTO*2
	HDMI, DVD/HD1, DVD/HD2, SCART, VIDEO1, VIDEO2, S-VIDEO, TV* inputs only
	ADAPTIVE CONTRAST	Sets the level of adjustment for dynamic contrast.		OFF
	HDMI, DVD/HD1, DVD/HD2, SCART, VIDEO1, VIDEO2, S-VIDEO, TV* inputs only
PICTURE MODE		Selects picture mode, [HIGHBRIGHT], [STANDARD], [sRGB], [CINEMA], [AMBIENT1] or		STANDARD
		[AMBIENT2]. See page 18.
PICTURE RESET		Resets the following settings within the PICTURE menu back to factory setting:		-
		BRIGHTNESS, CONTRAST, SHARPNESS, BLACK LEVEL, TINT, COLOR, COLOR
		TEMPERATURE, COLOR CONTROL , GAMMA SELECTION, MOVIE SETTINGS.
ADJUST
AUTO SETUP		Automatically adjusts Screen Size, H position, V position, Clock, Clock Phase and White Level.		-
VGA, RGB/HV inputs only
AUTO ADJUST		H Position, V Position and Clock Phase are adjusted automatically upon power on.		OFF
VGA, RGB/HV inputs only
H POSITION		Controls the horizontal position of the image within the Display area of the LCD.		-
All inputs except DVI, HDMI, DPORT		Press + to move right. Press - to move left.
V POSITION		Controls the vertical position of the image within the Display area of the LCD.		-
All inputs except DVI, HDMI, DPORT		Press + to move up. Press - to move down.
CLOCK		Press + to expand the width of the image on the right of the screen.		-
VGA, RGB/HV inputs only		Press - to narrow the width of the image on the left.
CLOCK PHASE		Adjusts the visual “noise” on the image.		-
VGA, RGB/HV, DVD/HD1, DVD/HD2, SCART inputs only
*: The product you purchased may not have this feature.			*2: depends on signal input

English-20