95-7866B KIT Assembly

DOUBLE DIN HEAD UNIT PROVISION/ ISO STACKED HEAD UNIT PROVISION

*Note: Refer also to the instructions included with the aftermarket radio.

1Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation.

2Slide the Double DIN head unit or stacked ISO head units into the bracket/radio housing assembly and secure the Double DIN head unit or stacked ISO head units to the assembly using the screws supplied with the radio. (Figure A)

3Reassemble dash in reverse order of disassembly.