Language

English

Deutsch

Français

Español

Italiano

Appendix

E - 19

Controls

Tools 2

OSM control menus are available in seven languages.

OSM POSITION

You can choose where you would like the OSM control im- age to appear on your screen. Selecting OSM Location al- lows you to manually adjust the position of the OSM con- trol menu left, right, up or down.

OSM TURN OFF

The OSM control menu will stay on as long as it is in use. In the OSM Turn Off sub-menu, you can select how long the monitor waits after the last touch of a button to shut off the OSM control menu. The preset choices are 10, 20, 30, 60 and 120 seconds.

OSM LOCK OUT

This control completely locks out access to all OSM control functions. When attempting to activate OSM controls while in the Lock Out mode, a screen will appear indicating the OSM controls are locked out. To activate the OSM Lock Out function, simultaneously press and hold down the PROCEED and button(s). To de-activate the OSM Lock Out mode, again simultaneously press and hold down the PROCEED and button(s).

FACTORY PRESET

Selecting Factory Preset allows you to reset all OSM control settings back to the factory settings. The RESET button will need to be held down for several seconds to take effect. Indi- vidual settings can be reset by highlighting the control to be reset and pressing the RESET button.

RESOLUTION NOTIFIER

This optimal resolution is 1280 x 1024. If ON is selected, a message will appear on the screen after 30 seconds, notifying you that the resolution is not at 1280 x 1024.

CN912B-2/LCD1810X/78135322

00.5.26, 0:04 PM