NEC LCD1770GX Raise and Lower Monitor Screen, Tilt and Swivel, Remove Monitor Stand for Mounting

Page 8

Raise and Lower Monitor Screen

The monitor may be raised or lowered. To raise or lower screen, place hands on each side of the monitor and lift or lower to the desired height (Figure RL.1).

NOTE: Handle with care when raising or lowering the monitor screen.

Figure RL.1

Tilt and Swivel

Grasp both sides of the monitor screen with your hands and adjust the tilt and swivel as desired (Figure TS.1).

NOTE: Handle with care when tilting and swivelling the monitor screen.

Figure TS.1

Remove Monitor Stand for Mounting

To prepare the monitor for alternate mounting purposes:

1. Place hands on each side of the monitor and lift up to the highest position. Remove the cable cover (Figure S.1). 2. Disconnect all cables.

3. Place monitor face down on a non-abrasive surface (Figure S.2).

4. Remove the 2 screws connecting the stand to the monitor (Figure S.2).

Figure S.1

Figure S.2

English-6

Image 8
Contents MultiSync LCD1770GX Index English-16Declaration English-1Canadian Department of Communications Compliance Statement Declaration of ConformityFCC Information English-2Contents Quick Start English-4Figure C.3 English-5Raise and Lower Monitor Screen Tilt and SwivelRemove Monitor Stand for Mounting English-6Flexible Arm Installation English-7Auto Adjust Analog input only ControlsBrightness/Contrast Controls Image Controls Analog input onlyColour Control System ToolsMenu Tools InformationEnglish-10 Safety Precautions and MaintenanceRecommended use Cleaning the LCD Panel Cleaning the CabinetErgonomics To avoid scratchesEnglish-12 SpecificationsMonitor Specifications MultiSync LCD1770GX Monitor Features English-13Troubleshooting TCO’03 Congratulations English-15Manufacturer’s Recycling and Energy Information Disposing of your old NEC product