PYLE Audio PLMRKT32 owner manual DIN REAR-MOUNT Method B

Page 5

INSTALLATION

DIN REAR-MOUNT (Method B)

If your vehicle is a Nissan, Toyota, follow these mounting instructions.

Use the screw holes marked T (Toyota), N (Nissan) located on both sides of the unit to fasten the unit to the factory radio mounting brackets supplied with your vehicle.

Side view showing

Screw Holes marked T, N

Factory Radio

Screw

Mounting

 

Bracket

 

Screw

Dashboard or

Console

To fasten the unit to the factory radio mounting brackets.

Align the screw holes on the bracket with the screw holes on the unit, and then tighten the screws (5x5mm) on each side. Note: the outer trim ring, sleeve and the metal strap are not used for method B installation.

5

Image 5
Contents Mobile Audio System Contents Take OUT Screw Before Installation InstallationInstallation Opening Installing the unitRemoving the unit DIN REAR-MOUNT Method B Main Unit Wiring ConnectionLocation of Keys OperationRadio Operation USB Play Operation Searching Track Directly SD/MMC Operation Supported MP3/WMA Decoding ModesGeneral SpecificationCD Player RadioSymptom Cause Solution Trouble Shooting8800-0C3023-02