continuously. If you experience a loss of signal or audio, reposition the antenna inside the home or outside as necessary.
3.Installing the Shuttle on the Cradle Install the shuttle as follows:
a.Carefully line up the shuttle rear spine grooves with the cradle guide spines; slide the latch tab
LATCH TAB
LOCK/UNLOCK
LEVERCRADLE TOP VIEW
SHUTTLE
LATCHING | ||
SYSTEM | ||
TAB | ||
CONNECTOR | ||
| ||
CRADLE | CONNECTOR | |
GUIDEPIN | ||
FRONT VIEW | ||
|
CRADLE GUIDE SPINES
lever to the unlock ( 
) position, and lower the shuttle into the cradle.
b.After making sure the connectors are properly lined up, gently press down on the shuttle to mate the connectors together.
c.Slide the latch tab lever to the lock ( 
) position; the tab will enter the shuttle latching tab recess to prevent vertical movement. The shuttle should now be nestled securely in the cradle.
| SHUTTLE | |
| REAR SPINE | |
SHUTTLE | GROOVES | |
SHUTTLE | ||
REAR VIEW | ||
| LATCHING | |
| TAB RECESS | |
| LATCH TAB | |
| LOCK/UNLOCK | |
CRADLE | LEVER | |
REAR | ANT RF | |
|
VIEW | CONNECTOR |
|
128-7370
7 of 12