Kenwood How to record CT-203/KXF-W4010 Deck B only, Normal recording, Set the recording level

Page 16

How to record (CT-203/KXF-W4010; Deck B only)

CT-2050/203/KXF-W6010/W4010 (En/M)

The cassette deck incorporates the Dolby HX Pro headroom extension function and auto-bias function to provide a re-

16 cording with superior high-frequency characteristics. Since this unit is not designed for recording with metal (TYPE ) tapes, do not use metal tapes for recording.

Preparation 1Make “Playback (recording) preparation”.

0

(CT-203/KXF-W4010; Insert a tape in deck B.)

CT-2050/KXF-W6010 only

2(Load a disc in the CD player.)

: Keys and control used in the operations described on this page.

Normal recording

1Select the source to be recorded.

ÖSelect by operating the input selector of the amplifier (optional).

ÖIn case of recording a FM broadcast,refer to discription of "How to use

the MPX FILTER key".

&

2Perform auto-bias adjustment. (The bias adjustment is applied to deck B.)

“AUTO BIAS”blinks. After approximately “AUTO BIAS” lightsup. 40 seconds

AUTO BIAS

3Set the recording level.

1Play a music source.

2Enter the record-pause mode.

CT-2050/KXF-W6010

8PAUSE ¦REC/ARM

CT-203/KXF-W4010

3Press the MODE key and select the "BAL."

mode. MODE

ÖThe optimum bias is set in about 40 seconds, after which the deck enters the stop mode.

ÖFor a fine adjustment after setting AUTO BIAS, refer to the description

of “Bias level adjustment”. (CT-2050/KXF-W6010 only)

&

ÖTo cancel the auto-bias adjustment operation in the middle, press the stop (7) key.

ÖRecording is possible even when the auto-bias setting is omitted.

ÖIf the amount of remaining tape is small, the auto-bias adjustment may be canceled in the middle and tape stopped at that position.

ÖThe bias level is canceled when the eject (0) key is pressed.

ÖWhile pressing the PAUSE (8) key, press the REC/ARM (¦) key.

Each press of the MODE key changes the setting.

1 “LEVEL” lights up: Recording level setting mode

2“BAL.” lights up: Recording balance setting mode

3“BIAS” lights up: Recording bias setting mode (Deck B of the

CT-2050/KXF-W6010 only)

4“LEVEL”,“BAL.”,and “BIAS”go off: Counter display mode

lights up

Left channel level

Right channel level

4Adjust the recording balance.

REC LEVEL/BAL. /BIAS

Right sound

°

°￿

Left sound

decreases.

MIN/L

MAX/R

decreases.

 

 

5Press the MODE key and select the "LEVEL" mode.

MODE

6Adjust the recording level.

REC LEVEL/BAL. /BIAS

Recording

°

°￿

Recording

level

MIN/L

MAX/R

level

 

 

decreases.

 

 

increases.

7Stop playing the source.

ÖIn counter, adjust the recording balance level so that the left and right displays are the same. You can also check with the ñ and å peak level indicators.

Each press of the MODE key changes the setting.

1 “LEVEL” lights up: Recording level setting mode

2“BAL.” lights up: Recording balance setting mode

3“BIAS” lights up: Recording bias setting mode (Deck B of the

CT-2050/KXF-W6010 only)

4“LEVEL”,“BAL.”,and “BIAS”go off: Counter display mode

 

 

0dB.

 

 

 

 

 

lights up

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Recording level display.

ÖAdjust the recording level so that the 0 dB of the peak level indicators sometimes lights up.

ÖThe recording level can be adjusted on both decks A and B. (CT-203/ KXF-W4010; Deck B only)

Page 15 Page 17
Image 16
Page 15 Page 17
Contents CT/KXF-W Series Safety precautions IntroductionSpecial features ContentsImportant items Maintenance CleaningCleaning the head section ReferenceWhen there is slack in the tape Handling the cassette tapeImportant items To store cassette tapesSystem connections Except for U.S.A., CanadaRemote Control System connectionsAutomatic Operation except XR equipment Synchronized Recording except XR equipmentControls and indicators CT-2050/KXF-W6010Controls and indicators Tape transport direction indicators Preparation for playback recordingPlayback recording preparation Before playback recordingNormal playback Relay playback To Stop relay playbackLoad cassette tapes in both decks 2Determine the playback conditionCT-2050/203/KXF-W6010/W4010 En/M Skip play operation Convenient music search DpssTo play a tune located 4 tunes beyond Determine the playback mode conditions Rewind & Play operationSingle-tune repeated playback operation Dash & Play operationHow to record CT-203/KXF-W4010 Deck B only Normal recordingSelect the source to be recorded Set the recording levelBias level adjustment Deck B of the CT-2050/KXF-W6010 only How to use the MPX Filter keyHow to record CT-203/KXF-W4010 Deck B only Start recordingTo stop recording To pause recording temporarily PauseTo start recording again from the biginning To cancel relay recording Set the relay recording modeAdjust the recording level Relay recording CT-2050/KXF-W6010 onlyTape dubbing operation Deck a \Deck B Tape dubbingTo pause dubbing To stop dubbingCD synchro recording Set the record-pause mode4Start playing the CD How to cancel Ccrs Recording of CD playback Ccrs Deck B onlyInsert a tape in deck B Determine the recording condition Press the Ccrs keyTimer playback of tape Timer operationsSet the timer 5Set the timer Timer relay recording CT-2050/KXF-W6010 onlyTimer operations Symptom Cause Remedy Operation to resetCase of difficulty Case of difficulty Glossary Dolby noise reduction systemRecording with Dolby HX Pro Auto-bias function28 CT-2050/KXF-W6010 SpecificationsFor your records
Related manuals
Manual 28 pages 42.46 Kb

CT-2050, KXF-W6010, KXF-W4010, CT-203 specifications

The Kenwood CT-203, KXF-W4010, and CT-2050 are standout models in the realm of car stereo systems, designed to elevate your driving experience with exceptional audio quality, modern features, and user-friendly functionality. These systems combine advanced technology with a sleek aesthetic, tailored for music enthusiasts on the go.

The Kenwood CT-203 is renowned for its versatile audio playback capabilities. This model boasts a high-power output that delivers deep bass and clear highs, allowing users to enjoy their favorite tracks with remarkable clarity. One of its key features is the built-in Bluetooth technology, enabling seamless wireless connections to smartphones for hands-free calls and music streaming. The CT-203 also supports various audio formats, ensuring compatibility with multiple devices.

Next in line is the KXF-W4010, a modern car stereo that emphasizes connectivity and personalization. This model includes a large touchscreen display that enhances user interaction, making it easy to navigate through playlists and settings. The KXF-W4010 supports both Apple CarPlay and Android Auto, providing an intuitive interface for integrating smartphones. Users appreciate the customizable equalizer settings that allow tailored sound adjustments, making the listening experience unique to individual preferences.

Finally, the Kenwood CT-2050 combines sophistication with impressive technology. This stereo system features advanced sound processing capabilities that enhance audio playback by minimizing distortion. The CT-2050 also comes equipped with USB ports for direct device connections and supports various streaming services, offering users multiple channels to enjoy their music. Additionally, the unit is designed with a user-friendly interface that simplifies setup and operation, allowing drivers to focus on the road while enjoying rich sound.

All these models feature reliable construction and durability, backed by Kenwood’s reputation for quality. With features like adjustable illumination, remote control options, and auxiliary inputs, the Kenwood CT-203, KXF-W4010, and CT-2050 cater to varied preferences while providing an exceptional listening experience. Whether you're commuting or embarking on a road trip, these car stereo systems promise to enhance every journey with outstanding audio performance.
Top Page Image Contents