Kenwood CT-203, CT-2050 Tape dubbing operation Deck a \Deck B, To pause dubbing, To stop dubbing

Page 20

Tape dubbing operation (Deck A \Deck B)

CT-2050/203/KXF-W6010/W4010 (En/M)

The dubbing refers to the copy of the recorded contents of a tape to another tape (tape in Deck A \ tape in Deck B).

20 Since this unit is not designed for recording with metal (TYPE ) tapes, do not use metal tapes for recording.

Preparation 1Load the tape to be played in deck A and the tape to be recorded in deck B. 0

2Set the tape transport directions of decks A and B to the same direction ( by pressing the play (2 or 3) key then pressing the stop (7) key immediately after it ).

3Make "Playback (recording) preparation".

CT-203/KXF-W4010 only

CT-2050/KXF-W6010 only

: Keys and control used in the operations described on this page.

Tape dubbing

1Perform auto-bias adjustment. (The bias adjustment is applied to deck B.)

“AUTO BIAS”blinks. After approximately “AUTO BIAS” lightsup. 40 seconds

AUTO BIAS

ÖThe optimum bias is set in about 40 seconds, after which the deck enters the stop mode.

ÖRecording is possible even if the auto-bias adjustment operation is omitted.

For normal-speed dubbing.

NORM.DUBB

CT-2050/KXF-W6010

NORMAL

DUBBING

CT-203/KXF-W4010

For high-speed dubbing.

Normal dubbing:

Dubbing at the normal

 

HIGH DUBB.

speed.

 

 

"DUBBING NORMAL" lights up.

CT-2050/KXF-W6010

 

HIGH

 

DUBBING

 

CT-203/KXF-W4010

 

High-speed dubbing: Dubbing at about twice the normal speed.

"DUBBING HIGH" lights up.

To pause dubbing

For normal-speed dubbing.

NORM.DUBB

CT-2050/KXF-W6010

NORMAL

DUBBING

CT-203/KXF-W4010

For high-speed dubbing.

HIGH DUBB.

CT-2050/KXF-W6010

HIGH

DUBBING

CT-203/KXF-W4010

ÖOnly deck B enters the record- pause mode after leaving a non- recorded space of about 4 seconds in case of normal-speed dubbing, or about 6 seconds in case of high-speed dubbing.

ÖTo resume dubbing after pause, press the same DUBBING key as above (NORMAL DUBBING or HIGH DUBBING) again.

To stop dubbing

Press the stop (7) key of Deck B.

2 7 3

ÖBoth decks A and B enter the stop mode.

1.The recording balance and recording level cannot be adjusted for dubbing.

2.The DOLBY NR is not active during dubbing.

The tape recorded by dubbing features the same NR system as the original tape in Deck A.

Notes 3. Noise from TV may interfere with dubbed sound if high-speed dubbing is executed near a TV set. To prevent this, install the system farther from the TV set.

4.If the original tape was recorded at a high level, the sound quality may be degraded, if high-speed dubbing is used. In such a case, use normal- speed dubbing.

Page 19 Page 21
Image 20
Page 19 Page 21
Contents CT/KXF-W Series Safety precautions IntroductionSpecial features ContentsImportant items Maintenance CleaningCleaning the head section ReferenceWhen there is slack in the tape Handling the cassette tapeImportant items To store cassette tapesSystem connections Except for U.S.A., CanadaRemote Control System connectionsAutomatic Operation except XR equipment Synchronized Recording except XR equipmentControls and indicators CT-2050/KXF-W6010Controls and indicators Tape transport direction indicators Preparation for playback recordingPlayback recording preparation Before playback recordingNormal playback Relay playback To Stop relay playbackLoad cassette tapes in both decks 2Determine the playback conditionCT-2050/203/KXF-W6010/W4010 En/M To play a tune located 4 tunes beyond Convenient music search DpssSkip play operation Determine the playback mode conditions Rewind & Play operationSingle-tune repeated playback operation Dash & Play operationHow to record CT-203/KXF-W4010 Deck B only Normal recordingSelect the source to be recorded Set the recording levelBias level adjustment Deck B of the CT-2050/KXF-W6010 only How to use the MPX Filter keyHow to record CT-203/KXF-W4010 Deck B only Start recordingTo start recording again from the biginning To pause recording temporarily PauseTo stop recording To cancel relay recording Set the relay recording modeAdjust the recording level Relay recording CT-2050/KXF-W6010 onlyTape dubbing operation Deck a \Deck B Tape dubbingTo pause dubbing To stop dubbing4Start playing the CD Set the record-pause modeCD synchro recording How to cancel Ccrs Recording of CD playback Ccrs Deck B onlyInsert a tape in deck B Determine the recording condition Press the Ccrs keySet the timer Timer operationsTimer playback of tape Timer operations Timer relay recording CT-2050/KXF-W6010 only5Set the timer Case of difficulty Operation to resetSymptom Cause Remedy Case of difficulty Glossary Dolby noise reduction systemRecording with Dolby HX Pro Auto-bias functionFor your records Specifications28 CT-2050/KXF-W6010
Related manuals
Manual 28 pages 42.46 Kb

CT-2050, KXF-W6010, KXF-W4010, CT-203 specifications

The Kenwood CT-203, KXF-W4010, and CT-2050 are standout models in the realm of car stereo systems, designed to elevate your driving experience with exceptional audio quality, modern features, and user-friendly functionality. These systems combine advanced technology with a sleek aesthetic, tailored for music enthusiasts on the go.

The Kenwood CT-203 is renowned for its versatile audio playback capabilities. This model boasts a high-power output that delivers deep bass and clear highs, allowing users to enjoy their favorite tracks with remarkable clarity. One of its key features is the built-in Bluetooth technology, enabling seamless wireless connections to smartphones for hands-free calls and music streaming. The CT-203 also supports various audio formats, ensuring compatibility with multiple devices.

Next in line is the KXF-W4010, a modern car stereo that emphasizes connectivity and personalization. This model includes a large touchscreen display that enhances user interaction, making it easy to navigate through playlists and settings. The KXF-W4010 supports both Apple CarPlay and Android Auto, providing an intuitive interface for integrating smartphones. Users appreciate the customizable equalizer settings that allow tailored sound adjustments, making the listening experience unique to individual preferences.

Finally, the Kenwood CT-2050 combines sophistication with impressive technology. This stereo system features advanced sound processing capabilities that enhance audio playback by minimizing distortion. The CT-2050 also comes equipped with USB ports for direct device connections and supports various streaming services, offering users multiple channels to enjoy their music. Additionally, the unit is designed with a user-friendly interface that simplifies setup and operation, allowing drivers to focus on the road while enjoying rich sound.

All these models feature reliable construction and durability, backed by Kenwood’s reputation for quality. With features like adjustable illumination, remote control options, and auxiliary inputs, the Kenwood CT-203, KXF-W4010, and CT-2050 cater to varied preferences while providing an exceptional listening experience. Whether you're commuting or embarking on a road trip, these car stereo systems promise to enhance every journey with outstanding audio performance.
Top Page Image Contents