Activation
Before you can listen to any of XM’s170 channels, you must firstactivate your XpressRC..
1Make sure your XpressRC is properly installed and receiving the XM signal so that you can hear the audio on channel 1..
2Make a note of your XM Radio ID. You can find it:
•On XM channel 0
•On the rear package label
•On the label on the back of your XpressRC
NOTE: The XM Radio ID does not use the letters I, O, S, or F..
3Activate your service:
•Browse to http://activate..xmradio..com and follow the instructions.
OR
•Call 1 800 XM RADIO
4When your service is activated, your XpressRC will receive all channels.
This usually takes 10 to 15 minutes, but may take up to an hour. Your radio must remain on until activated.
22