
Installing the swivel mount
CAUTION! The adhesive used with the swivel mount may make it difficult to remove. Do not install this mount on leather surfaces and make sure the air temperature is at least 60°F (15°C)..
1Locate a flat surface for the mount. Make sure there is ample room for the XM cradle and radio when installed..
2Clean the surface with the preparation kit and let it dry thoroughly.
3Peel off the adhesive liner. Position, press, and hold the swivel mount in place for 30 seconds.
IMPORTANT! Let the adhesive cure for 24 hours before attaching the XM cradle and radio to the mount.
4Turn the swivel to accommodate the XM cradle and radio. Adjust the tension via the center screw..
You can adjust this screw to adjust the tension of the
mount with a screwdriver..
17